From: Vidya Sagar <vidyas@nvidia.com>
To: bhelgaas@google.com, robh+dt@kernel.org, mark.rutland@arm.com,
thierry.reding@gmail.com, jonathanh@nvidia.com, kishon@ti.com,
catalin.marinas@arm.com, will.deacon@arm.com,
lorenzo.pieralisi@arm.com, jingoohan1@gmail.com,
gustavo.pimentel@synopsys.com, mperttunen@nvidia.com
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kthota@nvidia.com,
mmaddireddy@nvidia.com, vidyas@nvidia.com, sagar.tv@gmail.com
Subject: [PATCH V2 00/16] Add Tegra194 PCIe support
Date: Fri, 5 Apr 2019 01:24:27 +0530 [thread overview]
Message-ID: <1554407683-31580-1-git-send-email-vidyas@nvidia.com> (raw)
Tegra194 has six PCIe controllers based on Synopsys DesignWare core.
There are two Universal PHY (UPHY) blocks with each supporting 12(HSIO:
Hisg Speed IO) and 8(NVHS: NVIDIA High Speed) lanes respectively.
Controllers:0~4 use UPHY lanes from HSIO brick whereas Controller:5 uses
UPHY lanes from NVHS brick. Lane mapping in HSIO UPHY brick to each PCIe
controller (0~4) is controlled in XBAR module by BPMP-FW. Since PCIe
core has PIPE interface, a glue module called PIPE-to-UPHY (P2U) is used
to connect each UPHY lane (applicable to both HSIO and NVHS UPHY bricks)
to PCIe controller
This patch series
- Adds support for P2U PHY driver
- Adds support for PCIe host controller
- Adds device tree nodes each PCIe controllers
- Enables nodes applicable to p2972-0000 platform
- Adds helper APIs in Designware core driver to get capability regs offset
- Adds defines for new feature registers of PCIe spec revision 4
- Makes changes in DesignWare core driver to get Tegra194 PCIe working
Testing done on P2972-0000 platform
- Able to get PCIe link up with on-board Marvel eSATA controller
- Able to get PCIe link up with NVMe cards connected to M.2 Key-M slot
- Able to do data transfers with both SATA drives and NVMe cards
Note
- Enabling x8 slot on P2972-0000 platform requires pinmux driver for Tegra194.
It is being worked on currently and hence Controller:5 (i.e. x8 slot) is
disabled in this patch series. A future patch series would enable this.
- This series is based on top of the following series
Jisheng's patches to add support to .remove() in Designware sub-system
https://patchwork.kernel.org/project/linux-pci/list/?series=98559
My patches made on top of Jisheng's patches to export various symbols
https://patchwork.kernel.org/project/linux-pci/list/?series=101259
Changes since [v1]:
* Addressed review comments from Bjorn, Thierry, Jonathan, Rob & Kishon
* Added more patches in v2 series
Vidya Sagar (16):
PCI: Add #defines for PCIe spec r4.0 features
PCI/PME: Export pcie_pme_disable_msi() API
PCI: Export pcie_bus_config symbol
PCI: dwc: Perform dbi regs write lock towards the end
PCI: dwc: Move config space capability search API
PCI: dwc: Add ext config space capability search API
dt-bindings: PCI: designware: Add binding for CDM register check
PCI: dwc: Add support to enable CDM register check
Documentation/devicetree: Add PCIe supports-clkreq property
dt-bindings: PCI: tegra: Add device tree support for T194
dt-bindings: PHY: P2U: Add Tegra 194 P2U block
arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT
arm64: tegra: Enable PCIe slots in P2972-0000 board
phy: tegra: Add PCIe PIPE2UPHY support
PCI: tegra: Add Tegra194 PCIe support
arm64: Add Tegra194 PCIe driver to defconfig
.../devicetree/bindings/pci/designware-pcie.txt | 4 +
.../bindings/pci/nvidia,tegra194-pcie.txt | 181 ++
Documentation/devicetree/bindings/pci/pci.txt | 5 +
.../devicetree/bindings/phy/phy-tegra194-p2u.txt | 28 +
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +-
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 50 +
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 449 +++++
arch/arm64/configs/defconfig | 1 +
drivers/pci/controller/dwc/Kconfig | 11 +
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pcie-designware-ep.c | 37 +-
drivers/pci/controller/dwc/pcie-designware-host.c | 3 -
drivers/pci/controller/dwc/pcie-designware.c | 81 +
drivers/pci/controller/dwc/pcie-designware.h | 12 +
drivers/pci/controller/dwc/pcie-tegra194.c | 1760 ++++++++++++++++++++
drivers/pci/pci.c | 1 +
drivers/pci/pcie/pme.c | 6 +
drivers/pci/pcie/portdrv.h | 5 +-
drivers/phy/tegra/Kconfig | 7 +
drivers/phy/tegra/Makefile | 1 +
drivers/phy/tegra/pcie-p2u-tegra194.c | 120 ++
include/uapi/linux/pci_regs.h | 22 +-
22 files changed, 2743 insertions(+), 44 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
create mode 100644 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
create mode 100644 drivers/pci/controller/dwc/pcie-tegra194.c
create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c
--
2.7.4
next reply other threads:[~2019-04-04 19:54 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-04 19:54 Vidya Sagar [this message]
2019-04-04 19:54 ` [PATCH V2 01/16] PCI: Add #defines for PCIe spec r4.0 features Vidya Sagar
2019-04-11 10:13 ` Thierry Reding
2019-04-16 13:15 ` Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 02/16] PCI/PME: Export pcie_pme_disable_msi() API Vidya Sagar
2019-04-11 10:16 ` Thierry Reding
2019-04-16 13:30 ` Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 03/16] PCI: Export pcie_bus_config symbol Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 04/16] PCI: dwc: Perform dbi regs write lock towards the end Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 05/16] PCI: dwc: Move config space capability search API Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 06/16] PCI: dwc: Add ext " Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 07/16] dt-bindings: PCI: designware: Add binding for CDM register check Vidya Sagar
2019-04-15 14:54 ` Thierry Reding
2019-04-16 14:29 ` Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 08/16] PCI: dwc: Add support to enable " Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 09/16] Documentation/devicetree: Add PCIe supports-clkreq property Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 10/16] dt-bindings: PCI: tegra: Add device tree support for T194 Vidya Sagar
2019-04-15 15:08 ` Thierry Reding
2019-04-16 15:33 ` Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 11/16] dt-bindings: PHY: P2U: Add Tegra 194 P2U block Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 12/16] arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT Vidya Sagar
2019-04-15 15:15 ` Thierry Reding
2019-04-16 17:48 ` Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 13/16] arm64: tegra: Enable PCIe slots in P2972-0000 board Vidya Sagar
2019-04-15 15:12 ` Thierry Reding
2019-04-16 17:55 ` Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 14/16] phy: tegra: Add PCIe PIPE2UPHY support Vidya Sagar
2019-04-15 15:31 ` Thierry Reding
2019-04-15 15:33 ` Thierry Reding
2019-04-16 18:14 ` Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 15/16] PCI: tegra: Add Tegra194 PCIe support Vidya Sagar
2019-04-04 19:54 ` [PATCH V2 16/16] arm64: Add Tegra194 PCIe driver to defconfig Vidya Sagar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1554407683-31580-1-git-send-email-vidyas@nvidia.com \
--to=vidyas@nvidia.com \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=kthota@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=mmaddireddy@nvidia.com \
--cc=mperttunen@nvidia.com \
--cc=robh+dt@kernel.org \
--cc=sagar.tv@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).