From: Jeff LaBundy <jeff@labundy.com>
To: dmitry.torokhov@gmail.com, devicetree@vger.kernel.org
Cc: linux-input@vger.kernel.org, rydberg@bitmath.org,
robh+dt@kernel.org, mark.rutland@arm.com,
Jeff LaBundy <jeff@labundy.com>
Subject: [PATCH v8 1/2] dt-bindings: input: touchscreen: iqs5xx: Add bindings
Date: Sun, 7 Apr 2019 00:01:11 -0500 [thread overview]
Message-ID: <1554613272-10757-1-git-send-email-jeff@labundy.com> (raw)
This patch adds binding documentation for the Azoteq IQS550/572/525
family of trackpad/touchscreen controllers.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in v8:
- Added Reviewed-by trailer
Changes in v7:
- Removed the azoteq,exp-ver-major and azoteq,exp-ver-minor properties to
match the driver's updated device identification scheme
- Updated the example node to use a level-sensitive interrupt rather than
an edge-sensitive interrupt
- Removed previous Reviewed-by trailer as this file has since changed
Changes in v6:
- None
Changes in v5:
- None
Changes in v4:
- None
Changes in v3:
- Added Reviewed-by trailer
Changes in v2:
- Separated each valid "compatible" property with a line break
- Specified the polarity of the RDY and NRST pins
- Replaced duplicate definitions of common touchscreen properties with a
reference to touchscreen.txt
- Specified the example node as "touchscreen@74"
.../bindings/input/touchscreen/iqs5xx.txt | 80 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 81 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt b/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt
new file mode 100644
index 0000000..36f1f97
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt
@@ -0,0 +1,80 @@
+Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
+
+Required properties:
+
+- compatible : Must be equal to one of the following:
+ "azoteq,iqs550"
+ "azoteq,iqs572"
+ "azoteq,iqs525"
+
+- reg : I2C slave address for the device.
+
+- interrupts : GPIO to which the device's active-high RDY
+ output is connected (see [0]).
+
+- reset-gpios : GPIO to which the device's active-low NRST
+ input is connected (see [1]).
+
+Optional properties:
+
+- touchscreen-min-x : See [2].
+
+- touchscreen-min-y : See [2].
+
+- touchscreen-size-x : See [2]. If this property is omitted, the
+ maximum x-coordinate is specified by the
+ device's "X Resolution" register.
+
+- touchscreen-size-y : See [2]. If this property is omitted, the
+ maximum y-coordinate is specified by the
+ device's "Y Resolution" register.
+
+- touchscreen-max-pressure : See [2]. Pressure is expressed as the sum of
+ the deltas across all channels impacted by a
+ touch event. A channel's delta is calculated
+ as its count value minus a reference, where
+ the count value is inversely proportional to
+ the channel's capacitance.
+
+- touchscreen-fuzz-x : See [2].
+
+- touchscreen-fuzz-y : See [2].
+
+- touchscreen-fuzz-pressure : See [2].
+
+- touchscreen-inverted-x : See [2]. Inversion is applied relative to that
+ which may already be specified by the device's
+ FLIP_X and FLIP_Y register fields.
+
+- touchscreen-inverted-y : See [2]. Inversion is applied relative to that
+ which may already be specified by the device's
+ FLIP_X and FLIP_Y register fields.
+
+- touchscreen-swapped-x-y : See [2]. Swapping is applied relative to that
+ which may already be specified by the device's
+ SWITCH_XY_AXIS register field.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
+[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+
+Example:
+
+ &i2c1 {
+ /* ... */
+
+ touchscreen@74 {
+ compatible = "azoteq,iqs550";
+ reg = <0x74>;
+ interrupt-parent = <&gpio>;
+ interrupts = <17 4>;
+ reset-gpios = <&gpio 27 0>;
+
+ touchscreen-size-x = <640>;
+ touchscreen-size-y = <480>;
+
+ touchscreen-max-pressure = <16000>;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 4b1a2a8..51f9954 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -53,6 +53,7 @@ avic Shanghai AVIC Optoelectronics Co., Ltd.
avnet Avnet, Inc.
axentia Axentia Technologies AB
axis Axis Communications AB
+azoteq Azoteq (Pty) Ltd
bananapi BIPAI KEJI LIMITED
bhf Beckhoff Automation GmbH & Co. KG
bitmain Bitmain Technologies
--
2.7.4
next reply other threads:[~2019-04-07 5:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-07 5:01 Jeff LaBundy [this message]
2019-04-07 5:01 ` [PATCH v8 2/2] input: touchscreen: Add support for Azoteq IQS550/572/525 Jeff LaBundy
2019-04-26 0:08 ` Jeff LaBundy
2019-04-28 17:31 ` Dmitry Torokhov
2019-04-28 22:15 ` Jeff LaBundy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1554613272-10757-1-git-send-email-jeff@labundy.com \
--to=jeff@labundy.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).