[PATCH v5 1/7] ARM: dts: sun8i: r40: bananapi-m2-ultra: Add GPIO pin-bank regulator supplies

[Pablo Greco <pgreco-/kQrlZ55X3WoClj4AeEUq9i2O/JbrIOy@public.gmane.org>]

The bananapi-m2-ultra has the PMIC providing voltage to all the pin-bank
supply rails from its various regulator outputs, tie them to the pio
node.

Signed-off-by: Pablo Greco <pgreco-/kQrlZ55X3WoClj4AeEUq9i2O/JbrIOy@public.gmane.org>
---
 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index c488aaa..699579d 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -201,6 +201,12 @@
 &pio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
 };
 
 &reg_aldo2 {
-- 
1.8.3.1