[RFC V2 08/11] dt-bindings: interconnect: add MT8183 interconnect dt-bindings

[Henry Chen <henryc.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>]

Add interconnect provider dt-bindings for MT8183.

Signed-off-by: Henry Chen <henryc.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 .../bindings/interconnect/mtk,mt8183.txt           | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt

diff --git a/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
new file mode 100644
index 0000000..1cf1841
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
@@ -0,0 +1,24 @@
+Mediatek MT8183 interconnect binding
+
+MT8183 interconnect providers support dram bandwidth requirements. The provider
+is able to communicate with the DVFSRC and send the dram bandwidth to it.
+Provider nodes must reside within an DVFSRC device node.
+
+Required properties :
+- compatible : shall contain only one of the following:
+			"mediatek,mt8183-emi-icc"
+- #interconnect-cells : should contain 1
+
+Examples:
+
+dvfsrc@10012000 {
+	compatible = "mediatek,mt8183-dvfsrc";
+	reg = <0 0x10012000 0 0x1000>;
+	clocks = <&infracfg CLK_INFRA_DVFSRC>;
+	clock-names = "dvfsrc";
+	ddr_emi: interconnect {
+		compatible = "mediatek,mt8183-emi-icc";
+		#interconnect-cells = <1>;
+	};
+};
+
-- 
1.9.1