From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pablo Greco Subject: [PATCH v6 0/5] ARM: dts: sun8i: v40 Rewrite BPi M2 Berry DTS based on BPi M2 Ultra Date: Thu, 2 May 2019 10:33:44 -0300 Message-ID: <1556804030-25291-1-git-send-email-pgreco@centosproject.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-sunxi@googlegroups.com Cc: Pablo Greco , Rob Herring , Mark Rutland , Maxime Ripard , Chen-Yu Tsai , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org BPi M2 Berry is a trimmed down version of the BPi M2 Ultra, completely software compatible. Changes include: - 2GiB -> 1GiB - no eMMC - no onboard microphone - no IR - no blue LED - no charging (and power jack to USB) - dropped USB2 and connect USB1 to a 4-port HUB. Changes in v6: - Removed patch already queued for 5.3 - Reworked which nodes are added according to the new patch order - Squashed bt and wifi patches Changes in v5: - Changed commit order - Removed regulator-always-on from gpio regulators - Copied commit log for the bluetooth node from the m2-ultra Changes in v4: - Went back to v2 - Added GPIO pin-bank regulators (both m2-ultra and m2-berry) Changes in v3: - Removed "Sort device node dereferences" (already applied) - Added basic pio node - Tied GMAC regulators to the pio (both m2-ultra and m2-berry) Changes in v2: - Split into smaller patches Pablo Greco (5): ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 123 ++++++++++++++++++++++ 1 file changed, 123 insertions(+) -- 1.8.3.1