devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Kao <michael.kao@mediatek.com>
To: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	jamesjj.liao@mediatek.com, devicetree@vger.kernel.org,
	louis.yu@mediatek.com, dawei.chien@mediatek.com,
	linux-pm@vger.kernel.org,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	roger.lu@mediatek.com, linux-kernel@vger.kernel.org,
	Eduardo Valentin <edubezval@gmail.com>,
	fan.chen@mediatek.com, Rob Herring <robh+dt@kernel.org>,
	linux-mediatek@lists.infradead.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Zhang Rui <rui.zhang@intel.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/8] arm64: dts: mt8183: add/update dynamic power coefficients
Date: Wed, 8 May 2019 20:27:07 +0800	[thread overview]
Message-ID: <1557318427.29634.8.camel@mtksdccf07> (raw)
In-Reply-To: <CAJMQK-jujDXt18M8610G4GpHdrikTD0ZZG_=C2YTt63UfxuHuQ@mail.gmail.com>

On Fri, 2019-05-03 at 15:16 +0800, Hsin-Yi Wang wrote:
> On Thu, May 2, 2019 at 10:43 AM michael.kao <michael.kao@mediatek.com> wrote:
> >
> > Add dynamic power coefficients for all cores and update those of
> > CPU0 and CPU4.
> >
> > Signed-off-by: Michael.Kao <michael.kao@mediatek.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index b92116f..5668fb8 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -58,6 +58,8 @@
> >                         compatible = "arm,cortex-a53";
> >                         reg = <0x000>;
> >                         enable-method = "psci";
> > +                       dynamic-power-coefficient = <84>;
> > +                       #cooling-cells = <2>;
> Should this line be in [3/8] arm64: dts: mt8183: Add #cooling-cells to
> CPU nodes?
> 
I will fix the mistake at v2 patch list.
> >                 };
> >
> >                 cpu1: cpu@1 {
> > @@ -65,6 +67,8 @@
> >                         compatible = "arm,cortex-a53";
> >                         reg = <0x001>;
> >                         enable-method = "psci";
> > +                       dynamic-power-coefficient = <84>;
> > +                       #cooling-cells = <2>;
> >                 };
> >
> >                 cpu2: cpu@2 {
> > @@ -72,6 +76,8 @@
> >                         compatible = "arm,cortex-a53";
> >                         reg = <0x002>;
> >                         enable-method = "psci";
> > +                       dynamic-power-coefficient = <84>;
> > +                       #cooling-cells = <2>;
> >                 };
> >
> >                 cpu3: cpu@3 {
> > @@ -79,6 +85,8 @@
> >                         compatible = "arm,cortex-a53";
> >                         reg = <0x003>;
> >                         enable-method = "psci";
> > +                       dynamic-power-coefficient = <84>;
> > +                       #cooling-cells = <2>;
> >                 };
> >
> >                 cpu4: cpu@100 {
> > @@ -86,6 +94,8 @@
> >                         compatible = "arm,cortex-a73";
> >                         reg = <0x100>;
> >                         enable-method = "psci";
> > +                       dynamic-power-coefficient = <211>;
> > +                       #cooling-cells = <2>;
> >                 };
> >
> >                 cpu5: cpu@101 {
> > @@ -93,6 +103,8 @@
> >                         compatible = "arm,cortex-a73";
> >                         reg = <0x101>;
> >                         enable-method = "psci";
> > +                       dynamic-power-coefficient = <211>;
> > +                       #cooling-cells = <2>;
> >                 };
> >
> >                 cpu6: cpu@102 {
> > @@ -100,6 +112,8 @@
> >                         compatible = "arm,cortex-a73";
> >                         reg = <0x102>;
> >                         enable-method = "psci";
> > +                       dynamic-power-coefficient = <211>;
> > +                       #cooling-cells = <2>;
> >                 };
> >
> >                 cpu7: cpu@103 {
> > @@ -107,6 +121,8 @@
> >                         compatible = "arm,cortex-a73";
> >                         reg = <0x103>;
> >                         enable-method = "psci";
> > +                       dynamic-power-coefficient = <211>;
> > +                       #cooling-cells = <2>;
> >                 };
> >         };
> >
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

  reply	other threads:[~2019-05-08 12:27 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-02 10:43 [PATCH 0/8] Add Mediatek thermal dirver and dtsi michael.kao
     [not found] ` <1556793795-25204-1-git-send-email-michael.kao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-05-02 10:43   ` [PATCH 1/8] arm64: dts: mt8183: add thermal zone node michael.kao
2019-05-03  8:03     ` Hsin-Yi Wang
2019-05-03 16:46       ` Matthias Kaehlcke
2019-05-06 10:43         ` Daniel Lezcano
2019-05-08 12:23           ` Michael Kao
2019-05-10  8:14             ` Daniel Lezcano
2019-05-10 10:52             ` Michael Kao
2019-05-06  9:43     ` Daniel Lezcano
2019-05-02 10:43   ` [PATCH 6/8] thermal: mediatek: mt8183: fix bank number settings michael.kao
2019-05-07  8:58     ` Hsin-Yi Wang
2019-05-02 10:43 ` [PATCH 2/8] arm64: dts: mt8183: add/update dynamic power coefficients michael.kao
2019-05-03  7:16   ` Hsin-Yi Wang
2019-05-08 12:27     ` Michael Kao [this message]
2019-05-02 10:43 ` [PATCH 3/8] arm64: dts: mt8183: Add #cooling-cells to CPU nodes michael.kao
2019-05-06  5:25   ` Eddie Huang
2019-05-08 12:29     ` Michael Kao
2019-05-02 10:43 ` [PATCH 4/8] arm64: dts: mt8183: Configure CPU cooling michael.kao
2019-05-07  8:57   ` Hsin-Yi Wang
2019-05-02 10:43 ` [PATCH 5/8] arm64: dts: mt8183: Increase polling frequency for CPU thermal zone michael.kao
2019-05-07  8:58   ` Hsin-Yi Wang
2019-05-02 10:43 ` [PATCH 7/8] thermal: mediatek: add another get_temp ops for thermal sensors michael.kao
2019-05-11  2:31   ` Nicolas Boichat
2019-05-02 10:43 ` [PATCH 8/8] thermal: mediatek: use spinlock to protect PTPCORESEL michael.kao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557318427.29634.8.camel@mtksdccf07 \
    --to=michael.kao@mediatek.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=dawei.chien@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=fan.chen@mediatek.com \
    --cc=hsinyi@chromium.org \
    --cc=jamesjj.liao@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=louis.yu@mediatek.com \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=roger.lu@mediatek.com \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).