From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anson Huang Subject: [PATCH RESEND 3/3] arm64: dts: imx8mm: add clock for GPIO node Date: Sun, 12 May 2019 10:17:19 +0000 Message-ID: <1557655926-12915-3-git-send-email-Anson.Huang@nxp.com> References: <1557655926-12915-1-git-send-email-Anson.Huang@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <1557655926-12915-1-git-send-email-Anson.Huang@nxp.com> Content-Language: en-US Content-ID: Sender: linux-kernel-owner@vger.kernel.org To: "robh+dt@kernel.org" , "mark.rutland@arm.com" , "shawnguo@kernel.org" , "s.hauer@pengutronix.de" , "kernel@pengutronix.de" , "festevam@gmail.com" , "mturquette@baylibre.com" , "sboyd@kernel.org" , Jacky Bai , Leonard Crestez , "devicetree@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , "linux-kernel@vger.kernel.org" , "linux-clk@vger.kernel.org" Cc: dl-linux-imx List-Id: devicetree@vger.kernel.org i.MX8MM has clock gate for each GPIO bank, add clock info to GPIO node for clock management. Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng --- No change, just resend patch with correct encoding. --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dt= s/freescale/imx8mm.dtsi index 6b407a94..f32d4e9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -206,6 +206,7 @@ reg =3D <0x30200000 0x10000>; interrupts =3D , ; + clocks =3D <&clk IMX8MM_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells =3D <2>; interrupt-controller; @@ -217,6 +218,7 @@ reg =3D <0x30210000 0x10000>; interrupts =3D , ; + clocks =3D <&clk IMX8MM_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells =3D <2>; interrupt-controller; @@ -228,6 +230,7 @@ reg =3D <0x30220000 0x10000>; interrupts =3D , ; + clocks =3D <&clk IMX8MM_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells =3D <2>; interrupt-controller; @@ -239,6 +242,7 @@ reg =3D <0x30230000 0x10000>; interrupts =3D , ; + clocks =3D <&clk IMX8MM_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells =3D <2>; interrupt-controller; @@ -250,6 +254,7 @@ reg =3D <0x30240000 0x10000>; interrupts =3D , ; + clocks =3D <&clk IMX8MM_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells =3D <2>; interrupt-controller; --=20 2.7.4