* [PATCH v3 1/2] dt-bindings: mtd: brcmnand: Make nand-ecc-strength and nand-ecc-step-size optional
@ 2019-05-21 14:44 Kamal Dasu
2019-06-03 8:02 ` Miquel Raynal
0 siblings, 1 reply; 2+ messages in thread
From: Kamal Dasu @ 2019-05-21 14:44 UTC (permalink / raw)
To: linux-mtd
Cc: bcm-kernel-feedback-list, linux-kernel, Kamal Dasu,
David Woodhouse, Brian Norris, Marek Vasut, Miquel Raynal,
Richard Weinberger, Vignesh Raghavendra, Rob Herring,
Mark Rutland, devicetree
nand-ecc-strength and nand-ecc-step-size can be made optional as
brcmnand driver can support using raw NAND layer detected values.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index bcda1df..0d952af 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -101,12 +101,12 @@ Required properties:
number (e.g., 0, 1, 2, etc.)
- #address-cells : see partition.txt
- #size-cells : see partition.txt
-- nand-ecc-strength : see nand.txt
-- nand-ecc-step-size : must be 512 or 1024. See nand.txt
Optional properties:
+- nand-ecc-strength : see nand-controller.yaml
+- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml
- nand-on-flash-bbt : boolean, to enable the on-flash BBT for this
- chip-select. See nand.txt
+ chip-select. See nand-controller.yaml
- brcm,nand-oob-sector-size : integer, to denote the spare area sector size
expected for the ECC layout in use. This size, in
addition to the strength and step-size,
--
1.9.0.138.g2de3478
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: mtd: brcmnand: Make nand-ecc-strength and nand-ecc-step-size optional
2019-05-21 14:44 [PATCH v3 1/2] dt-bindings: mtd: brcmnand: Make nand-ecc-strength and nand-ecc-step-size optional Kamal Dasu
@ 2019-06-03 8:02 ` Miquel Raynal
0 siblings, 0 replies; 2+ messages in thread
From: Miquel Raynal @ 2019-06-03 8:02 UTC (permalink / raw)
To: Kamal Dasu, linux-mtd
Cc: Miquel Raynal, Mark Rutland, devicetree, Vignesh Raghavendra,
Richard Weinberger, linux-kernel, Marek Vasut, Rob Herring,
bcm-kernel-feedback-list, Brian Norris, David Woodhouse
On Tue, 2019-05-21 at 14:44:21 UTC, Kamal Dasu wrote:
> nand-ecc-strength and nand-ecc-step-size can be made optional as
> brcmnand driver can support using raw NAND layer detected values.
>
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-03 8:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-05-21 14:44 [PATCH v3 1/2] dt-bindings: mtd: brcmnand: Make nand-ecc-strength and nand-ecc-step-size optional Kamal Dasu
2019-06-03 8:02 ` Miquel Raynal
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).