From: Teresa Remmet <t.remmet@phytec.de>
To: linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: "Tony Lindgren" <tony@atomide.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Daniel Schultz" <d.schultz@phytec.de>,
"Benoît Cousson" <bcousson@baylibre.com>
Subject: [PATCH 2/7] ARM: dts: am335x phytec boards: Remove regulator node
Date: Fri, 24 May 2019 15:19:58 +0200 [thread overview]
Message-ID: <1558704003-393769-3-git-send-email-t.remmet@phytec.de> (raw)
In-Reply-To: <1558704003-393769-1-git-send-email-t.remmet@phytec.de>
Move regulators directly to the root node like most am335x boards do.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
arch/arm/boot/dts/am335x-phycore-som.dtsi | 18 +++++++-----------
arch/arm/boot/dts/am335x-wega.dtsi | 16 ++++++----------
2 files changed, 13 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 23c3039c567e..f5b53d30e9a9 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -30,17 +30,13 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- regulators {
- compatible = "simple-bus";
-
- vcc5v: fixedregulator0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- };
+ vcc5v: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 84581fed3d06..d91ff3e99470 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -15,16 +15,12 @@
compatible = "ti,da830-evm-audio";
};
- regulators {
- compatible = "simple-bus";
-
- vcc3v3: fixedregulator1 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
+ vcc3v3: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
};
};
--
2.7.4
next prev parent reply other threads:[~2019-05-24 13:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-24 13:19 [PATCH 0/7] AM335x Phytec boards update Teresa Remmet
2019-05-24 13:19 ` [PATCH 1/7] ARM: dts: am335x phytec boards: Fix cd-gpios active level Teresa Remmet
2019-06-10 7:07 ` Tony Lindgren
2019-06-10 12:10 ` Tony Lindgren
2019-05-24 13:19 ` Teresa Remmet [this message]
2019-05-24 13:19 ` [PATCH 3/7] ARM: dts: am335x-phycore-som: Add emmc node Teresa Remmet
2019-05-24 13:20 ` [PATCH 4/7] ARM: dts: am335x-phycore-som: Enable gpmc node in dts files Teresa Remmet
2019-05-24 13:20 ` [PATCH 5/7] ARM: dts: am335x-pcm-953: Update user led names Teresa Remmet
2019-05-24 13:20 ` [PATCH 6/7] ARM: dts: am335x-pcm-953: Remove eth phy delay Teresa Remmet
2019-05-24 13:20 ` [PATCH 7/7] ARM: dts: Add support for phyBOARD-REGOR-AM335x Teresa Remmet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1558704003-393769-3-git-send-email-t.remmet@phytec.de \
--to=t.remmet@phytec.de \
--cc=bcousson@baylibre.com \
--cc=d.schultz@phytec.de \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).