From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chunfeng Yun Subject: [PATCH v6 04/10] dt-bindings: usb: mtu3: add properties about USB Role Switch Date: Wed, 29 May 2019 15:43:42 +0800 Message-ID: <1559115828-19146-5-git-send-email-chunfeng.yun@mediatek.com> References: <1559115828-19146-1-git-send-email-chunfeng.yun@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1559115828-19146-1-git-send-email-chunfeng.yun@mediatek.com> Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring , Greg Kroah-Hartman , Heikki Krogerus Cc: Mark Rutland , Chunfeng Yun , Matthias Brugger , Adam Thomson , Li Jun , Badhri Jagan Sridharan , Hans de Goede , Andy Shevchenko , Min Guo , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, Biju Das , Linus Walleij , Yu Chen List-Id: devicetree@vger.kernel.org Now the USB Role Switch is supported, so add properties about it, and modify some description related. Signed-off-by: Chunfeng Yun Reviewed-by: Rob Herring --- v4 no changes v5 changes: 1. modify decription about extcon and vbus-supply properties 2. make this patch depend on [1] [1]: [v3] dt-binding: usb: add usb-role-switch property https://patchwork.kernel.org/patch/10934835/ v4 no changes v3 no changes v2 changes: 1. fix typo 2. refer new binding about connector property --- .../devicetree/bindings/usb/mediatek,mtu3.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index 3382b5cb471d..3a8300205cdb 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -28,8 +28,13 @@ Optional properties: parent's address space - extcon : external connector for vbus and idpin changes detection, needed when supports dual-role mode. + it's considered valid for compatibility reasons, not allowed for + new bindings, and use "usb-role-switch" property instead. - vbus-supply : reference to the VBUS regulator, needed when supports dual-role mode. + it's considered valid for compatibility reasons, not allowed for + new bindings, and put into a usb-connector node. + see connector/usb-connector.txt. - pinctrl-names : a pinctrl state named "default" is optional, and need be defined if auto drd switch is enabled, that means the property dr_mode is set as "otg", and meanwhile the property "mediatek,enable-manual-drd" @@ -39,6 +44,8 @@ Optional properties: - maximum-speed : valid arguments are "super-speed", "high-speed" and "full-speed"; refer to usb/generic.txt + - usb-role-switch : use USB Role Switch to support dual-role switch, but + not extcon; see usb/generic.txt. - enable-manual-drd : supports manual dual-role switch via debugfs; usually used when receptacle is TYPE-A and also wants to support dual-role mode. @@ -61,6 +68,9 @@ The xhci should be added as subnode to mtu3 as shown in the following example if host mode is enabled. The DT binding details of xhci can be found in: Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +The port would be added as subnode if use "usb-role-switch" property. + see graph.txt + Example: ssusb: usb@11271000 { compatible = "mediatek,mt8173-mtu3"; -- 2.21.0