[PATCH V2 2/2] dt-bindings: Document the DesignWare IP reset bindings

[Luis Oliveira <Luis.Oliveira@synopsys.com>]

This adds documentation of device tree bindings for the
DesignWare IP reset controller.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com>
---
Changelog
- Add active low configuration example
- Fix compatible string in the active high example

 .../devicetree/bindings/reset/snps,dw-reset.txt    | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/snps,dw-reset.txt

diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
new file mode 100644
index 0000000..85f3301
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
@@ -0,0 +1,30 @@
+Synopsys DesignWare Reset controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+
+- compatible: should be one of the following.
+	"snps,dw-high-reset" - for active high configuration
+	"snps,dw-low-reset" - for active low configuration
+
+- reg: physical base address of the controller and length of memory mapped
+	region.
+
+- #reset-cells: must be 1.
+
+example:
+
+	dw_rst_1: reset-controller@0000 {
+		  compatible = "snps,dw-high-reset";
+	 	  reg = <0x0000 0x4>;
+		  #reset-cells = <1>;
+	};
+
+	dw_rst_2: reset-controller@1000 {i
+		  compatible = "snps,dw-low-reset";
+		  reg = <0x1000 0x8>;
+		  #reset-cells = <1>;
+	};
-- 
2.7.4