Re: [PATCH v4 01/14] dt-bindings: Add binding for MT2712 MIPI-CSI2

[CK Hu <ck.hu@mediatek.com>]

Hi, Tomasz:

On Mon, 2019-06-10 at 12:32 +0900, Tomasz Figa wrote:
> Hi CK, Stu,
> 
> On Mon, Jun 10, 2019 at 11:34 AM CK Hu <ck.hu@mediatek.com> wrote:
> >
> > Hi, Stu:
> >
> > "mediatek,mt2712-mipicsi" and "mediatek,mt2712-mipicsi-common" have many
> > common part with "mediatek,mt8183-seninf", and I've a discussion in [1],
> > so I would like these two to be merged together.
> >
> > [1] https://patchwork.kernel.org/patch/10979131/
> >
> 
> Thanks CK for spotting this.
> 
> I also noticed that the driver in fact handles two hardware blocks at
> the same time - SenInf and CamSV. Unless the architecture is very
> different from MT8183, I'd suggest splitting it.
> 
> On a general note, the MT8183 SenInf driver has received several
> rounds of review comments already, but I couldn't find any comments
> posted for this one.
> 
> Given the two aspects above and also based on my quick look at code
> added by this series, I'd recommend adding MT2712 support on top of
> the MT8183 series.

In [1], "mediatek,mt8183-seninf" use one device to control multiple csi
instance, so it duplicate many register definition. In [2], one
"mediatek,mt2712-mipicsi" device control one csi instance, so there are
multiple device and the register definition does not duplicate. You
recommend adding MT2712 support on top of the MT8183 series, do you mean
that "mediatek,mt2712-mipicsi" should use one device to control multiple
csi instance and duplicate the register setting?

[1] https://patchwork.kernel.org/patch/10979121/
[2] https://patchwork.kernel.org/patch/10974573/

Regards,
CK

> 
> Best regards,
> Tomasz