[Patch V4 1/8] phy: tegra: xusb: t210: add XUSB dual mode support

[Nagarjuna Kristam <nkristam@nvidia.com>]

Configure the port capabilities based on usb_dr_mode settings.

Based on work by JC Kuo <jckuo@nvidia.com>.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Reviewed-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
 drivers/phy/tegra/xusb-tegra210.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 05bee32..4beebcc 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2014-2019, NVIDIA CORPORATION.  All rights reserved.
  * Copyright (C) 2015 Google, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -47,7 +47,10 @@
 #define XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_XUSB 0x1
 
 #define XUSB_PADCTL_USB2_PORT_CAP 0x008
+#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DISABLED(x) (0x0 << ((x) * 4))
 #define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(x) (0x1 << ((x) * 4))
+#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DEVICE(x) (0x2 << ((x) * 4))
+#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_OTG(x) (0x3 << ((x) * 4))
 #define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(x) (0x3 << ((x) * 4))
 
 #define XUSB_PADCTL_SS_PORT_MAP 0x014
@@ -72,6 +75,7 @@
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(x) (0x084 + (x) * 0x40)
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT 7
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
 
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
@@ -965,7 +969,14 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
 	value &= ~XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(index);
-	value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(index);
+	if (port->mode == USB_DR_MODE_UNKNOWN)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DISABLED(index);
+	else if (port->mode == USB_DR_MODE_PERIPHERAL)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DEVICE(index);
+	else if (port->mode == USB_DR_MODE_HOST)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(index);
+	else if (port->mode == USB_DR_MODE_OTG)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_OTG(index);
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP);
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
@@ -997,7 +1008,12 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
 	value &= ~(XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK <<
 		   XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT);
-	value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+	if (port->mode == USB_DR_MODE_HOST)
+		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+	else
+		value |=
+		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL <<
+		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT;
 	padctl_writel(padctl, value,
 		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
 
-- 
2.7.4