From mboxrd@z Thu Jan  1 00:00:00 1970
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Subject: Re: [PATCH v6 09/10] usb: roles: add USB Type-B GPIO connector
 driver
Date: Tue, 11 Jun 2019 13:59:31 +0800
Message-ID: <1560232771.8487.120.camel@mhfsdcap03>
References: <1559115828-19146-1-git-send-email-chunfeng.yun@mediatek.com>
         <1559115828-19146-10-git-send-email-chunfeng.yun@mediatek.com>
         <9640aa29-bc96-ded1-e757-e885bda354a8@nvidia.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <9640aa29-bc96-ded1-e757-e885bda354a8@nvidia.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Nagarjuna Kristam <nkristam@nvidia.com>
Cc: Rob Herring <robh+dt@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Heikki Krogerus <heikki.krogerus@linux.intel.com>, Mark Rutland <mark.rutland@arm.com>, Matthias Brugger <matthias.bgg@gmail.com>, Adam Thomson <Adam.Thomson.Opensource@diasemi.com>, Li Jun <jun.li@nxp.com>, Badhri Jagan Sridharan <badhri@google.com>, Hans de Goede <hdegoede@redhat.com>, Andy Shevchenko <andy.shevchenko@gmail.com>, Min Guo <min.guo@mediatek.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, Biju Das <biju.das@bp.renesas.com>, Linus Walleij <linus.walleij@linaro.org>, Yu Chen <chenyu56@huawei.com>
List-Id: devicetree@vger.kernel.org

On Mon, 2019-06-10 at 16:03 +0530, Nagarjuna Kristam wrote:
> Tested-by: Nagarjuna Kristam <nkristam@nvidia.com>
> 
Thanks

> On 29-05-2019 13:13, Chunfeng Yun wrote:
> > Due to the requirement of usb-connector.txt binding, the old way
> > using extcon to support USB Dual-Role switch is now deprecated
> > when use Type-B connector.
> > This patch introduces a driver of Type-B connector which typically
> > uses an input GPIO to detect USB ID pin, and try to replace the
> > function provided by extcon-usb-gpio driver
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > v6 changes:
> >   1. get usb-role-swtich by usb_role_switch_get()
> > 
> > v5 changes:
> >   1. put usb_role_switch when error happens suggested by Biju
> >   2. don't treat bype-B connector as a virtual device suggested by Rob
> > 
> > v4 changes:
> >   1. remove linux/gpio.h suggested by Linus
> >   2. put node when error happens
> > 
> > v3 changes:
> >   1. treat bype-B connector as a virtual device;
> >   2. change file name again
> > 
> > v2 changes:
> >   1. file name is changed
> >   2. use new compatible
> > ---
> >  drivers/usb/roles/Kconfig           |  11 ++
> >  drivers/usb/roles/Makefile          |   1 +
> >  drivers/usb/roles/typeb-conn-gpio.c | 286 ++++++++++++++++++++++++++++
> >  3 files changed, 298 insertions(+)
> >  create mode 100644 drivers/usb/roles/typeb-conn-gpio.c
> > 
> > diff --git a/drivers/usb/roles/Kconfig b/drivers/usb/roles/Kconfig
> > index f8b31aa67526..d1156e18a81a 100644
> > --- a/drivers/usb/roles/Kconfig
> > +++ b/drivers/usb/roles/Kconfig
> >