* [PATCH v2] arm64: dts: imx8mm: Init rates and parents configs for clocks
@ 2019-07-03 12:08 Abel Vesa
2019-07-03 13:05 ` Daniel Baluta
2019-07-18 6:15 ` Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Abel Vesa @ 2019-07-03 12:08 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Leonard Crestez, Jacky Bai,
Sascha Hauer
Cc: Daniel Baluta, NXP Linux Team, linux-arm-kernel, devicetree,
Linux Kernel Mailing List, Abel Vesa
Add the initial configuration for clocks that need default parent and rate
setting. This is based on the vendor tree clock provider parents and rates
configuration except this is doing the setup in dts rather than using clock
consumer API in a clock provider driver.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---
Changes since v1:
- removed the PCIE, CSI and DISP clocks parent setting since
that should be done from their driver.
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 232a741..ba2034d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -451,6 +451,17 @@
<&clk_ext3>, <&clk_ext4>;
clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
"clk_ext3", "clk_ext4";
+ assigned-clocks = <&clk IMX8MM_CLK_NOC>,
+ <&clk IMX8MM_CLK_AUDIO_AHB>,
+ <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
+ <&clk IMX8MM_SYS_PLL3>,
+ <&clk IMX8MM_VIDEO_PLL1>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+ <&clk IMX8MM_SYS_PLL1_800M>;
+ assigned-clock-rates = <0>,
+ <400000000>,
+ <750000000>,
+ <594000000>;
};
src: reset-controller@30390000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2] arm64: dts: imx8mm: Init rates and parents configs for clocks
2019-07-03 12:08 [PATCH v2] arm64: dts: imx8mm: Init rates and parents configs for clocks Abel Vesa
@ 2019-07-03 13:05 ` Daniel Baluta
2019-07-18 6:15 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Daniel Baluta @ 2019-07-03 13:05 UTC (permalink / raw)
To: Abel Vesa
Cc: Rob Herring, Mark Rutland, Shawn Guo, Leonard Crestez, Jacky Bai,
Sascha Hauer, Daniel Baluta, NXP Linux Team, linux-arm-kernel,
Devicetree List, Linux Kernel Mailing List
On Wed, Jul 3, 2019 at 3:10 PM Abel Vesa <abel.vesa@nxp.com> wrote:
>
> Add the initial configuration for clocks that need default parent and rate
> setting. This is based on the vendor tree clock provider parents and rates
> configuration except this is doing the setup in dts rather than using clock
> consumer API in a clock provider driver.
>
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Thanks Abel, this helps audio. For audio clk:
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
>
> Changes since v1:
> - removed the PCIE, CSI and DISP clocks parent setting since
> that should be done from their driver.
>
> arch/arm64/boot/dts/freescale/imx8mm.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index 232a741..ba2034d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -451,6 +451,17 @@
> <&clk_ext3>, <&clk_ext4>;
> clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
> "clk_ext3", "clk_ext4";
> + assigned-clocks = <&clk IMX8MM_CLK_NOC>,
> + <&clk IMX8MM_CLK_AUDIO_AHB>,
> + <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
> + <&clk IMX8MM_SYS_PLL3>,
> + <&clk IMX8MM_VIDEO_PLL1>;
> + assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
> + <&clk IMX8MM_SYS_PLL1_800M>;
> + assigned-clock-rates = <0>,
> + <400000000>,
> + <750000000>,
> + <594000000>;
> };
>
> src: reset-controller@30390000 {
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2] arm64: dts: imx8mm: Init rates and parents configs for clocks
2019-07-03 12:08 [PATCH v2] arm64: dts: imx8mm: Init rates and parents configs for clocks Abel Vesa
2019-07-03 13:05 ` Daniel Baluta
@ 2019-07-18 6:15 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2019-07-18 6:15 UTC (permalink / raw)
To: Abel Vesa
Cc: Rob Herring, Mark Rutland, Leonard Crestez, Jacky Bai,
Sascha Hauer, Daniel Baluta, NXP Linux Team, linux-arm-kernel,
devicetree, Linux Kernel Mailing List
On Wed, Jul 03, 2019 at 03:08:22PM +0300, Abel Vesa wrote:
> Add the initial configuration for clocks that need default parent and rate
> setting. This is based on the vendor tree clock provider parents and rates
> configuration except this is doing the setup in dts rather than using clock
> consumer API in a clock provider driver.
>
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-07-18 6:15 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-07-03 12:08 [PATCH v2] arm64: dts: imx8mm: Init rates and parents configs for clocks Abel Vesa
2019-07-03 13:05 ` Daniel Baluta
2019-07-18 6:15 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).