From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jiangfeng Xiao Subject: [PATCH v2 06/10] net: hisilicon: dt-bindings: Add an field of port-handle Date: Tue, 9 Jul 2019 11:31:07 +0800 Message-ID: <1562643071-46811-7-git-send-email-xiaojiangfeng@huawei.com> References: <1562643071-46811-1-git-send-email-xiaojiangfeng@huawei.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1562643071-46811-1-git-send-email-xiaojiangfeng@huawei.com> Sender: linux-kernel-owner@vger.kernel.org To: davem@davemloft.net, robh+dt@kernel.org, yisen.zhuang@huawei.com, salil.mehta@huawei.com, mark.rutland@arm.com, dingtianhong@huawei.com, xiaojiangfeng@huawei.com Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, leeyou.li@huawei.com, nixiaoming@huawei.com, jianping.liu@huawei.com, xiekunxun@huawei.com List-Id: devicetree@vger.kernel.org In general, group is the same as the port, but some boards specify a special group for better load balancing of each processing unit. Signed-off-by: Jiangfeng Xiao --- Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt index d1df8a0..464c0da 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt @@ -10,6 +10,7 @@ Required properties: phandle, specifies a reference to the syscon ppe node port, port number connected to the controller channel, recv channel start from channel * number (RX_DESC_NUM) + group, field in the pkg desc, in general, it is the same as the port. - phy-mode: see ethernet.txt [1]. Optional properties: @@ -66,7 +67,7 @@ Example: reg = <0x28b0000 0x10000>; interrupts = <0 413 4>; phy-mode = "mii"; - port-handle = <&ppe 31 0>; + port-handle = <&ppe 31 0 31>; }; ge0: ethernet@2800000 { @@ -74,7 +75,7 @@ Example: reg = <0x2800000 0x10000>; interrupts = <0 402 4>; phy-mode = "sgmii"; - port-handle = <&ppe 0 1>; + port-handle = <&ppe 0 1 0>; phy-handle = <&phy0>; }; @@ -83,6 +84,6 @@ Example: reg = <0x2880000 0x10000>; interrupts = <0 410 4>; phy-mode = "sgmii"; - port-handle = <&ppe 8 2>; + port-handle = <&ppe 8 2 8>; phy-handle = <&phy1>; }; -- 1.8.5.6