devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pramod Kumar <pramod.kumar_1@nxp.com>
To: "robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	"manivannan.sadhasivam@linaro.org"
	<manivannan.sadhasivam@linaro.org>,
	Aisheng Dong <aisheng.dong@nxp.com>,
	"Michal.Vokac@ysoft.com" <Michal.Vokac@ysoft.com>,
	Leo Li <leoyang.li@nxp.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Pramod Kumar <pramod.kumar_1@nxp.com>,
	Vabhav Sharma <vabhav.sharma@nxp.com>
Subject: [PATCH v4 2/2] arm64: dts: nxp: add ls1046a-frwy board support
Date: Tue, 16 Jul 2019 13:43:31 +0000	[thread overview]
Message-ID: <1563284586-29928-3-git-send-email-pramod.kumar_1@nxp.com> (raw)
In-Reply-To: <1563284586-29928-1-git-send-email-pramod.kumar_1@nxp.com>

ls1046afrwy board is based on nxp ls1046a SoC.
Board support's 4GB ddr memory, i2c, microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile             |   1 +
 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 156 +++++++++++++++++++++
 2 files changed, 157 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 0bd122f..1211531 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
new file mode 100644
index 0000000..cda4998
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2019 NXP.
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A FRWY Board";
+	compatible = "fsl,ls1046a-frwy", "fsl,ls1046a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT8642SEV-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&duart2 {
+	status = "okay";
+};
+
+&duart3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c512";
+				reg = <0x52>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NAND Flash */
+	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x10000>;
+	};
+
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy4>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy2>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy1>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@f2000 {
+		phy-handle = <&qsgmii_phy3>;
+		phy-connection-type = "qsgmii";
+	};
+
+	mdio@fd000 {
+		qsgmii_phy1: ethernet-phy@1c {
+			reg = <0x1c>;
+		};
+
+		qsgmii_phy2: ethernet-phy@1d {
+			reg = <0x1d>;
+		};
+
+		qsgmii_phy3: ethernet-phy@1e {
+			reg = <0x1e>;
+		};
+
+		qsgmii_phy4: ethernet-phy@1f {
+			reg = <0x1f>;
+		};
+	};
+};
-- 
2.7.4

  parent reply	other threads:[~2019-07-16 13:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-16 13:43 [PATCH v4 0/2] arm64: dts: nxp: add ls1046a frwy board support Pramod Kumar
2019-07-16 13:43 ` [PATCH v4 1/2] dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board Pramod Kumar
2019-07-23  6:50   ` Shawn Guo
2019-07-16 13:43 ` Pramod Kumar [this message]
2019-07-23  6:52   ` [PATCH v4 2/2] arm64: dts: nxp: add ls1046a-frwy board support Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1563284586-29928-3-git-send-email-pramod.kumar_1@nxp.com \
    --to=pramod.kumar_1@nxp.com \
    --cc=Michal.Vokac@ysoft.com \
    --cc=aisheng.dong@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=vabhav.sharma@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).