From: Sam Shih <sam.shih@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Thierry Reding <thierry.reding@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>,
John Crispin <john@phrozen.org>,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
sam shih <sam.shih@mediatek.com>
Subject: [PATCH v4 4/10] pwm: mediatek: use pwm_mediatek as common prefix
Date: Tue, 20 Aug 2019 09:40:19 +0800 [thread overview]
Message-ID: <1566265225-27452-5-git-send-email-sam.shih@mediatek.com> (raw)
In-Reply-To: <1566265225-27452-1-git-send-email-sam.shih@mediatek.com>
From: sam shih <sam.shih@mediatek.com>
Use pwm_mediatek as common prefix to match the filename.
No functional change intended.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
drivers/pwm/pwm-mediatek.c | 117 ++++++++++++++++++-------------------
1 file changed, 58 insertions(+), 59 deletions(-)
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index a70b69a975c1..d85761ad5283 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Mediatek Pulse Width Modulator driver
+ * MediaTek Pulse Width Modulator driver
*
* Copyright (C) 2015 John Crispin <blogic@openwrt.org>
* Copyright (C) 2017 Zhi Mao <zhi.mao@mediatek.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
*/
#include <linux/err.h>
@@ -34,43 +32,44 @@
#define PWM45THRES_FIXUP 0x34
#define PWM_CLK_DIV_MAX 7
-
-struct mtk_pwm_platform_data {
+struct pwm_mediatek_of_data {
unsigned int fallback_npwms;
bool pwm45_fixup;
bool has_clks;
};
/**
- * struct mtk_pwm_chip - struct representing PWM chip
+ * struct pwm_mediatek_chip - struct representing PWM chip
* @chip: linux PWM chip representation
* @regs: base address of PWM chip
* @clk_top: the top clock generator
* @clk_main: the clock used by PWM core
* @clk_pwms: the clock used by each PWM channel
*/
-struct mtk_pwm_chip {
+struct pwm_mediatek_chip {
struct pwm_chip chip;
void __iomem *regs;
struct clk *clk_top;
struct clk *clk_main;
struct clk **clk_pwms;
unsigned int clk_freq;
- const struct mtk_pwm_platform_data *soc;
+ const struct pwm_mediatek_of_data *soc;
};
-static const unsigned int mtk_pwm_reg_offset[] = {
+static const unsigned int pwm_mediatek_reg_offset[] = {
0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
};
-static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
+static inline struct pwm_mediatek_chip *
+to_pwm_mediatek_chip(struct pwm_chip *chip)
{
- return container_of(chip, struct mtk_pwm_chip, chip);
+ return container_of(chip, struct pwm_mediatek_chip, chip);
}
-static int mtk_pwm_clk_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+static int pwm_mediatek_clk_enable(struct pwm_chip *chip,
+ struct pwm_device *pwm)
{
- struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+ struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
int ret;
if (!pc->soc->has_clks)
@@ -98,9 +97,10 @@ static int mtk_pwm_clk_enable(struct pwm_chip *chip, struct pwm_device *pwm)
return ret;
}
-static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+static void pwm_mediatek_clk_disable(struct pwm_chip *chip,
+ struct pwm_device *pwm)
{
- struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+ struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
if (!pc->soc->has_clks)
return;
@@ -110,23 +110,23 @@ static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
clk_disable_unprepare(pc->clk_top);
}
-static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
- unsigned int offset)
+static inline u32 pwm_mediatek_readl(struct pwm_mediatek_chip *chip,
+ unsigned int num, unsigned int offset)
{
- return readl(chip->regs + mtk_pwm_reg_offset[num] + offset);
+ return readl(chip->regs + pwm_mediatek_reg_offset[num] + offset);
}
-static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
- unsigned int num, unsigned int offset,
- u32 value)
+static inline void pwm_mediatek_writel(struct pwm_mediatek_chip *chip,
+ unsigned int num, unsigned int offset,
+ u32 value)
{
- writel(value, chip->regs + mtk_pwm_reg_offset[num] + offset);
+ writel(value, chip->regs + pwm_mediatek_reg_offset[num] + offset);
}
-static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
- struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+ struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
unsigned int clk_freq;
u32 clkdiv = 0, cnt_period, cnt_duty, reg_width = PWMDWIDTH,
reg_thres = PWMTHRES;
@@ -138,7 +138,7 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
else
clk_freq = pc->clk_freq;
- ret = mtk_pwm_clk_enable(chip, pwm);
+ ret = pwm_mediatek_clk_enable(chip, pwm);
if (ret < 0)
return ret;
@@ -155,7 +155,7 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
}
if (clkdiv > PWM_CLK_DIV_MAX) {
- mtk_pwm_clk_disable(chip, pwm);
+ pwm_mediatek_clk_disable(chip, pwm);
dev_err(chip->dev, "period %d not supported\n", period_ns);
return -EINVAL;
}
@@ -170,22 +170,22 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
}
cnt_duty = DIV_ROUND_CLOSEST_ULL((u64)duty_ns * 1000, resolution);
- mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
- mtk_pwm_writel(pc, pwm->hwpwm, reg_width, cnt_period);
- mtk_pwm_writel(pc, pwm->hwpwm, reg_thres, cnt_duty);
+ pwm_mediatek_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
+ pwm_mediatek_writel(pc, pwm->hwpwm, reg_width, cnt_period);
+ pwm_mediatek_writel(pc, pwm->hwpwm, reg_thres, cnt_duty);
- mtk_pwm_clk_disable(chip, pwm);
+ pwm_mediatek_clk_disable(chip, pwm);
return 0;
}
-static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+static int pwm_mediatek_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
- struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+ struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
u32 value;
int ret;
- ret = mtk_pwm_clk_enable(chip, pwm);
+ ret = pwm_mediatek_clk_enable(chip, pwm);
if (ret < 0)
return ret;
@@ -196,29 +196,29 @@ static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
return 0;
}
-static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+static void pwm_mediatek_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
- struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+ struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
u32 value;
value = readl(pc->regs);
value &= ~BIT(pwm->hwpwm);
writel(value, pc->regs);
- mtk_pwm_clk_disable(chip, pwm);
+ pwm_mediatek_clk_disable(chip, pwm);
}
-static const struct pwm_ops mtk_pwm_ops = {
- .config = mtk_pwm_config,
- .enable = mtk_pwm_enable,
- .disable = mtk_pwm_disable,
+static const struct pwm_ops pwm_mediatek_ops = {
+ .config = pwm_mediatek_config,
+ .enable = pwm_mediatek_enable,
+ .disable = pwm_mediatek_disable,
.owner = THIS_MODULE,
};
-static int mtk_pwm_probe(struct platform_device *pdev)
+static int pwm_mediatek_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- struct mtk_pwm_chip *pc;
+ struct pwm_mediatek_chip *pc;
struct resource *res;
unsigned int npwms;
unsigned int clk_freq;
@@ -285,7 +285,7 @@ static int mtk_pwm_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pc);
pc->chip.dev = &pdev->dev;
- pc->chip.ops = &mtk_pwm_ops;
+ pc->chip.ops = &pwm_mediatek_ops;
pc->chip.base = -1;
pc->chip.npwm = npwms;
@@ -298,55 +298,55 @@ static int mtk_pwm_probe(struct platform_device *pdev)
return 0;
}
-static int mtk_pwm_remove(struct platform_device *pdev)
+static int pwm_mediatek_remove(struct platform_device *pdev)
{
- struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
+ struct pwm_mediatek_chip *pc = platform_get_drvdata(pdev);
return pwmchip_remove(&pc->chip);
}
-static const struct mtk_pwm_platform_data mt2712_pwm_data = {
+static const struct pwm_mediatek_of_data mt2712_pwm_data = {
.fallback_npwms = 8,
.pwm45_fixup = false,
.has_clks = true,
};
-static const struct mtk_pwm_platform_data mt7622_pwm_data = {
+static const struct pwm_mediatek_of_data mt7622_pwm_data = {
.fallback_npwms = 6,
.pwm45_fixup = false,
.has_clks = true,
};
-static const struct mtk_pwm_platform_data mt7623_pwm_data = {
+static const struct pwm_mediatek_of_data mt7623_pwm_data = {
.fallback_npwms = 5,
.pwm45_fixup = true,
.has_clks = true,
};
-static const struct mtk_pwm_platform_data mt7628_pwm_data = {
+static const struct pwm_mediatek_of_data mt7628_pwm_data = {
.fallback_npwms = 4,
.pwm45_fixup = true,
.has_clks = false,
};
-static const struct of_device_id mtk_pwm_of_match[] = {
+static const struct of_device_id pwm_mediatek_of_match[] = {
{ .compatible = "mediatek,mt2712-pwm", .data = &mt2712_pwm_data },
{ .compatible = "mediatek,mt7622-pwm", .data = &mt7622_pwm_data },
{ .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
{ .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
{ },
};
-MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
+MODULE_DEVICE_TABLE(of, pwm_mediatek_of_match);
-static struct platform_driver mtk_pwm_driver = {
+static struct platform_driver pwm_mediatek_driver = {
.driver = {
- .name = "mtk-pwm",
- .of_match_table = mtk_pwm_of_match,
+ .name = "pwm-mediatek",
+ .of_match_table = pwm_mediatek_of_match,
},
- .probe = mtk_pwm_probe,
- .remove = mtk_pwm_remove,
+ .probe = pwm_mediatek_probe,
+ .remove = pwm_mediatek_remove,
};
-module_platform_driver(mtk_pwm_driver);
+module_platform_driver(pwm_mediatek_driver);
MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
--
2.17.1
next prev parent reply other threads:[~2019-08-20 1:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 1:40 [PATCH v4 0/10] Add mt7629 and fix mt7628 pwm Sam Shih
2019-08-20 1:40 ` [PATCH v4 1/10] pwm: mediatek: add a property "num-pwms" Sam Shih
2019-08-20 5:32 ` Uwe Kleine-König
2019-08-20 1:40 ` [PATCH v4 2/10] pwm: mediatek: droping the check for of_device_get_match_data Sam Shih
2019-08-20 5:40 ` Uwe Kleine-König
2019-08-20 1:40 ` [PATCH v4 3/10] pwm: mediatek: allocate the clks array dynamically and fix mt7628 pwm Sam Shih
2019-08-20 5:51 ` Uwe Kleine-König
2019-08-20 1:40 ` Sam Shih [this message]
2019-08-20 5:55 ` [PATCH v4 4/10] pwm: mediatek: use pwm_mediatek as common prefix Uwe Kleine-König
2019-08-20 1:40 ` [PATCH v4 5/10] dt-bindings: pwm: add a property "num-pwms" Sam Shih
2019-08-20 5:56 ` Uwe Kleine-König
2019-08-20 1:40 ` [PATCH v4 6/10] dt-bindings: pwm: update bindings for MT7628 SoC Sam Shih
2019-08-20 5:58 ` Uwe Kleine-König
2019-08-20 1:40 ` [PATCH v4 7/10] arm64: dts: mt7622: add a property "num-pwms" for PWM node Sam Shih
2019-08-20 1:40 ` [PATCH v4 8/10] arm: dts: mt7623: " Sam Shih
2019-08-20 1:40 ` [PATCH v4 9/10] dt-bindings: pwm: update bindings for MT7629 SoC Sam Shih
2019-08-20 18:00 ` Rob Herring
2019-08-20 1:40 ` [PATCH v4 10/10] arm: dts: mediatek: add mt7629 pwm support Sam Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1566265225-27452-5-git-send-email-sam.shih@mediatek.com \
--to=sam.shih@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=john@phrozen.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pwm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ryder.lee@mediatek.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).