From: houlong wei <houlong.wei@mediatek.com>
To: Bibby Hsieh <bibby.hsieh@mediatek.com>
Cc: "Jassi Brar" <jassisinghbrar@gmail.com>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"Rob Herring" <robh+dt@kernel.org>,
"CK Hu (胡俊光)" <ck.hu@mediatek.com>,
"Daniel Kurtz" <djkurtz@chromium.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-mediatek@lists.infradead.org"
<linux-mediatek@lists.infradead.org>,
srv_heupstream <srv_heupstream@mediatek.com>,
"Sascha Hauer" <kernel@pengutronix.de>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Nicolas Boichat" <drinkcat@chromium.org>
Subject: Re: [RESEND, PATCH v13 09/12] soc: mediatek: cmdq: define the instruction struct
Date: Tue, 20 Aug 2019 17:39:20 +0800 [thread overview]
Message-ID: <1566293960.24117.15.camel@mhfsdcap03> (raw)
In-Reply-To: <20190820084932.22282-10-bibby.hsieh@mediatek.com>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
On Tue, 2019-08-20 at 16:49 +0800, Bibby Hsieh wrote:
> Define an instruction structure for gce driver to append command.
> This structure can make the client's code more readability.
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> Reviewed-by: CK Hu <ck.hu@mediatek.com>
> ---
> drivers/soc/mediatek/mtk-cmdq-helper.c | 106 +++++++++++++++--------
> include/linux/mailbox/mtk-cmdq-mailbox.h | 2 +
> 2 files changed, 74 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 7aa0517ff2f3..e3d5b0be8e79 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -9,12 +9,24 @@
> #include <linux/mailbox_controller.h>
> #include <linux/soc/mediatek/mtk-cmdq.h>
>
> -#define CMDQ_ARG_A_WRITE_MASK 0xffff
> #define CMDQ_WRITE_ENABLE_MASK BIT(0)
> #define CMDQ_EOC_IRQ_EN BIT(0)
> #define CMDQ_EOC_CMD ((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
> << 32 | CMDQ_EOC_IRQ_EN)
>
> +struct cmdq_instruction {
> + union {
> + u32 value;
> + u32 mask;
> + };
> + union {
> + u16 offset;
> + u16 event;
> + };
> + u8 subsys;
> + u8 op;
> +};
> +
> static void cmdq_client_timeout(struct timer_list *t)
> {
> struct cmdq_client *client = from_timer(client, t, timer);
> @@ -110,10 +122,8 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
> }
> EXPORT_SYMBOL(cmdq_pkt_destroy);
>
> -static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> - u32 arg_a, u32 arg_b)
> +static struct cmdq_instruction *cmdq_pkt_append_command(struct cmdq_pkt *pkt)
> {
> - u64 *cmd_ptr;
>
> if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
> /*
> @@ -127,81 +137,109 @@ static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> pkt->cmd_buf_size += CMDQ_INST_SIZE;
> WARN_ONCE(1, "%s: buffer size %u is too small !\n",
> __func__, (u32)pkt->buf_size);
> - return -ENOMEM;
> + return NULL;
> }
> - cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
> - (*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> +
> + *(u64 *)(pkt->va_base + pkt->cmd_buf_size) = 0;
> pkt->cmd_buf_size += CMDQ_INST_SIZE;
>
> - return 0;
> + return pkt->va_base + pkt->cmd_buf_size - CMDQ_INST_SIZE;
> }
>
> int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value)
> {
> - u32 arg_a = (offset & CMDQ_ARG_A_WRITE_MASK) |
> - (subsys << CMDQ_SUBSYS_SHIFT);
> + struct cmdq_instruction *inst;
> +
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WRITE;
> + inst->value = value;
> + inst->offset = offset;
> + inst->subsys = subsys;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_write);
>
> int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> u16 offset, u32 value, u32 mask)
> {
> - u32 offset_mask = offset;
> - int err = 0;
> + struct cmdq_instruction *inst;
> + u16 offset_mask = offset;
>
> if (mask != 0xffffffff) {
> - err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_MASK;
> + inst->mask = ~mask;
> offset_mask |= CMDQ_WRITE_ENABLE_MASK;
> }
> - err |= cmdq_pkt_write(pkt, value, subsys, offset_mask);
>
> - return err;
> + return cmdq_pkt_write(pkt, subsys, offset_mask, value);
> }
> EXPORT_SYMBOL(cmdq_pkt_write_mask);
>
> int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> {
> - u32 arg_b;
> + struct cmdq_instruction *inst;
>
> if (event >= CMDQ_MAX_EVENT)
> return -EINVAL;
>
> - /*
> - * WFE arg_b
> - * bit 0-11: wait value
> - * bit 15: 1 - wait, 0 - no wait
> - * bit 16-27: update value
> - * bit 31: 1 - update, 0 - no update
> - */
> - arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WFE;
> + inst->value = CMDQ_WFE_OPTION;
> + inst->event = event;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event, arg_b);
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_wfe);
>
> int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
> {
> + struct cmdq_instruction *inst;
> +
> if (event >= CMDQ_MAX_EVENT)
> return -EINVAL;
>
> - return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE, event,
> - CMDQ_WFE_UPDATE);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_WFE;
> + inst->value = CMDQ_WFE_UPDATE;
> + inst->event = event;
> +
> + return 0;
> }
> EXPORT_SYMBOL(cmdq_pkt_clear_event);
>
> static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> {
> - int err;
> + struct cmdq_instruction *inst;
> +
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
>
> - /* insert EOC and generate IRQ for each command iteration */
> - err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> + inst->op = CMDQ_CODE_EOC;
> + inst->value = CMDQ_EOC_IRQ_EN;
>
> - /* JUMP to end */
> - err |= cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> + inst = cmdq_pkt_append_command(pkt);
> + if (!inst)
> + return -ENOMEM;
> +
> + inst->op = CMDQ_CODE_JUMP;
> + inst->value = CMDQ_JUMP_PASS;
>
> - return err;
> + return 0;
> }
>
> static void cmdq_pkt_flush_async_cb(struct cmdq_cb_data data)
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 911475da7a53..c8adedefaf42 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -19,6 +19,8 @@
> #define CMDQ_WFE_UPDATE BIT(31)
> #define CMDQ_WFE_WAIT BIT(15)
> #define CMDQ_WFE_WAIT_VALUE 0x1
> +#define CMDQ_WFE_OPTION (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
> + CMDQ_WFE_WAIT_VALUE)
> /** cmdq event maximum */
> #define CMDQ_MAX_EVENT 0x3ff
>
next prev parent reply other threads:[~2019-08-20 9:39 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 8:49 [RESEND, PATCH v13 00/12] support gce on mt8183 platform Bibby Hsieh
[not found] ` <20190820084932.22282-1-bibby.hsieh-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-08-20 8:49 ` [RESEND, PATCH v13 01/12] dt-binding: gce: remove thread-num property Bibby Hsieh
2019-08-20 8:49 ` [RESEND, PATCH v13 02/12] dt-binding: gce: add gce header file for mt8183 Bibby Hsieh
2019-08-20 8:49 ` [RESEND, PATCH v13 03/12] dt-binding: gce: add binding for gce client reg property Bibby Hsieh
2019-08-20 8:49 ` [RESEND, PATCH v13 04/12] mailbox: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data Bibby Hsieh
2019-08-23 11:32 ` Matthias Brugger
2019-08-20 8:49 ` [RESEND, PATCH v13 05/12] mailbox: mediatek: cmdq: support mt8183 gce function Bibby Hsieh
2019-08-20 8:49 ` [RESEND, PATCH v13 06/12] soc: mediatek: cmdq: clear the event in cmdq initial flow Bibby Hsieh
2019-08-23 11:36 ` Matthias Brugger
2019-08-23 11:43 ` Matthias Brugger
2019-08-20 8:49 ` [RESEND, PATCH v13 07/12] soc: mediatek: cmdq: reorder the parameter Bibby Hsieh
2019-08-23 12:05 ` Matthias Brugger
2019-08-20 8:49 ` [RESEND, PATCH v13 08/12] soc: mediatek: cmdq: change the type of input parameter Bibby Hsieh
2019-08-23 12:09 ` Matthias Brugger
2019-08-20 8:49 ` [RESEND, PATCH v13 09/12] soc: mediatek: cmdq: define the instruction struct Bibby Hsieh
2019-08-20 9:39 ` houlong wei [this message]
2019-08-23 13:50 ` Matthias Brugger
2019-08-27 4:12 ` Bibby Hsieh
2019-08-27 10:04 ` Matthias Brugger
2019-08-20 8:49 ` [RESEND, PATCH v13 10/12] soc: mediatek: cmdq: add polling function Bibby Hsieh
2019-08-20 9:50 ` houlong wei
2019-08-23 14:05 ` Matthias Brugger
2019-08-27 4:07 ` Bibby Hsieh
2019-08-20 8:49 ` [RESEND, PATCH v13 11/12] soc: mediatek: cmdq: add cmdq_dev_get_client_reg function Bibby Hsieh
2019-08-20 9:40 ` houlong wei
2019-08-20 9:47 ` houlong wei
2019-08-23 14:21 ` Matthias Brugger
2019-08-27 3:59 ` Bibby Hsieh
2019-08-27 10:13 ` Matthias Brugger
2019-08-28 8:32 ` Bibby Hsieh
2019-08-20 8:49 ` [RESEND, PATCH v13 12/12] arm64: dts: add gce node for mt8183 Bibby Hsieh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1566293960.24117.15.camel@mhfsdcap03 \
--to=houlong.wei@mediatek.com \
--cc=bibby.hsieh@mediatek.com \
--cc=ck.hu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@chromium.org \
--cc=drinkcat@chromium.org \
--cc=jassisinghbrar@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).