From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabrizio Castro Subject: [PATCH v3 7/8] [HACK] arm64: dts: renesas: draak: Enable LVDS Date: Wed, 28 Aug 2019 19:36:41 +0100 Message-ID: <1567017402-5895-8-git-send-email-fabrizio.castro@bp.renesas.com> References: <1567017402-5895-1-git-send-email-fabrizio.castro@bp.renesas.com> Return-path: In-Reply-To: <1567017402-5895-1-git-send-email-fabrizio.castro@bp.renesas.com> Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring , Mark Rutland Cc: Fabrizio Castro , Simon Horman , Geert Uytterhoeven , Magnus Damm , linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Chris Paterson , Biju Das , Laurent Pinchart , Kieran Bingham , Jacopo Mondi , sam@ravnborg.org List-Id: devicetree@vger.kernel.org Enable and connect the second LVDS encoder to the second LVDS input of the THC63LVD1024 for dual-link LVDS operation. This requires changing the default settings of SW45 and SW47 to OFF and ON respectively. This patch is based on Laurent's dual-LVDS work: https://patchwork.kernel.org/patch/10965045/ Signed-off-by: Fabrizio Castro --- v2->v3: * new patch Geert, no need to review this patch unless they like the idea behind this series. Thanks, Fab --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index b38f9d4..38b9c5a 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -87,11 +87,20 @@ port@0 { reg = <0>; - thc63lvd1024_in: endpoint { + dual-lvds-even-pixels; + thc63lvd1024_in0: endpoint { remote-endpoint = <&lvds0_out>; }; }; + port@1 { + reg = <1>; + dual-lvds-odd-pixels; + thc63lvd1024_in1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + port@2 { reg = <2>; thc63lvd1024_out: endpoint { @@ -489,7 +498,7 @@ ports { port@1 { lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; + remote-endpoint = <&thc63lvd1024_in0>; }; }; }; @@ -507,6 +516,14 @@ <&x13_clk>, <&extal_clk>; clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds1_out: endpoint { + remote-endpoint = <&thc63lvd1024_in1>; + }; + }; + }; }; &ohci0 { -- 2.7.4