From: Anson Huang <Anson.Huang@nxp.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, leonard.crestez@nxp.com,
daniel.lezcano@linaro.org, ping.bai@nxp.com,
daniel.baluta@nxp.com, jun.li@nxp.com, abel.vesa@nxp.com,
l.stach@pengutronix.de, andrew.smirnov@gmail.com,
ccaione@baylibre.com, angus@akkea.ca, agx@sigxcpu.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH V2 2/3] arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
Date: Tue, 8 Oct 2019 08:55:44 +0800 [thread overview]
Message-ID: <1570496145-11053-2-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1570496145-11053-1-git-send-email-Anson.Huang@nxp.com>
On i.MX8MM, usdhc's ipg clock is from IMX8MM_CLK_IPG_ROOT,
assign it explicitly instead of using IMX8MM_CLK_DUMMY.
Fixes: a05ea40eb384 ("arm64: dts: imx: Add i.mx8mm dtsi support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V1:
- Add fixes tag.
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 7c4dcce..8aafad2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -694,7 +694,7 @@
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_DUMMY>,
+ clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
@@ -710,7 +710,7 @@
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_DUMMY>,
+ clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
@@ -724,7 +724,7 @@
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_DUMMY>,
+ clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
--
2.7.4
next prev parent reply other threads:[~2019-10-08 0:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-08 0:55 [PATCH V2 1/3] arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk Anson Huang
2019-10-08 0:55 ` Anson Huang [this message]
2019-10-08 0:55 ` [PATCH V2 3/3] arm64: dts: imx8mn: " Anson Huang
2019-10-14 13:10 ` [PATCH V2 1/3] arm64: dts: imx8mq: " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1570496145-11053-2-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=agx@sigxcpu.org \
--cc=andrew.smirnov@gmail.com \
--cc=angus@akkea.ca \
--cc=ccaione@baylibre.com \
--cc=daniel.baluta@nxp.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=ping.bai@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).