[PATCH v2 0/3] pinctrl: meson-a1: add pinctrl driver

[PATCH v2 0/3] pinctrl: meson-a1: add pinctrl driver

[Qianggui Song]

This patchset adds Pin controller driver support for Meson-A1 Soc
which shares the same register layout of pinmux with previous
Meson-G12A, however there is difference for gpio and pin config
registers in A1.

Changes since v1 at [0]:
 - collect Reviewed-by
 - modify commit log
 - add an extra dt parser function for a1

[0] https://lore.kernel.org/linux-amlogic/1568700442-18540-1-git-send-email-qianggui.song@amlogic.com/

Qianggui Song (3):
  pinctrl: add compatible for Amlogic Meson A1 pin controller
  pinctrl: meson-a1: add pinctrl driver for Meson A1 Soc
  arm64: dts: meson: a1: add pinctrl controller support

 .../devicetree/bindings/pinctrl/meson,pinctrl.txt  |   1 +
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi          |  18 +
 drivers/pinctrl/meson/Kconfig                      |   6 +
 drivers/pinctrl/meson/Makefile                     |   1 +
 drivers/pinctrl/meson/pinctrl-meson-a1.c           | 942 +++++++++++++++++++++
 drivers/pinctrl/meson/pinctrl-meson.c              |  16 +-
 drivers/pinctrl/meson/pinctrl-meson.h              |   5 +
 include/dt-bindings/gpio/meson-a1-gpio.h           |  73 ++
 8 files changed, 1061 insertions(+), 1 deletion(-)
 create mode 100644 drivers/pinctrl/meson/pinctrl-meson-a1.c
 create mode 100644 include/dt-bindings/gpio/meson-a1-gpio.h

-- 
1.9.1

[PATCH v2 1/3] pinctrl: add compatible for Amlogic Meson A1 pin controller

[Qianggui Song]

Add new compatible name for Amlogic's Meson-A1 pin controller
add a dt-binding header file which document the detail pin names.
Note that A1 doesn't need DS bank reg any more, use gpio reg as
base.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
 .../devicetree/bindings/pinctrl/meson,pinctrl.txt  |  1 +
 include/dt-bindings/gpio/meson-a1-gpio.h           | 73 ++++++++++++++++++++++
 2 files changed, 74 insertions(+)
 create mode 100644 include/dt-bindings/gpio/meson-a1-gpio.h

diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 10dc4f7176ca..0aff1f28495c 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -15,6 +15,7 @@ Required properties for the root node:
 		      "amlogic,meson-axg-aobus-pinctrl"
 		      "amlogic,meson-g12a-periphs-pinctrl"
 		      "amlogic,meson-g12a-aobus-pinctrl"
+		      "amlogic,meson-a1-periphs-pinctrl"
  - reg: address and size of registers controlling irq functionality
 
 === GPIO sub-nodes ===
diff --git a/include/dt-bindings/gpio/meson-a1-gpio.h b/include/dt-bindings/gpio/meson-a1-gpio.h
new file mode 100644
index 000000000000..40e57a5ff1db
--- /dev/null
+++ b/include/dt-bindings/gpio/meson-a1-gpio.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Qianggui Song <qianggui.song@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_A1_GPIO_H
+#define _DT_BINDINGS_MESON_A1_GPIO_H
+
+#define GPIOP_0		0
+#define GPIOP_1		1
+#define GPIOP_2		2
+#define GPIOP_3		3
+#define GPIOP_4		4
+#define GPIOP_5		5
+#define GPIOP_6		6
+#define GPIOP_7		7
+#define GPIOP_8		8
+#define GPIOP_9		9
+#define GPIOP_10	10
+#define GPIOP_11	11
+#define GPIOP_12	12
+#define GPIOB_0		13
+#define GPIOB_1		14
+#define GPIOB_2		15
+#define GPIOB_3		16
+#define GPIOB_4		17
+#define GPIOB_5		18
+#define GPIOB_6		19
+#define GPIOX_0		20
+#define GPIOX_1		21
+#define GPIOX_2		22
+#define GPIOX_3		23
+#define GPIOX_4		24
+#define GPIOX_5		25
+#define GPIOX_6		26
+#define GPIOX_7		27
+#define GPIOX_8		28
+#define GPIOX_9		29
+#define GPIOX_10	30
+#define GPIOX_11	31
+#define GPIOX_12	32
+#define GPIOX_13	33
+#define GPIOX_14	34
+#define GPIOX_15	35
+#define GPIOX_16	36
+#define GPIOF_0		37
+#define GPIOF_1		38
+#define GPIOF_2		39
+#define GPIOF_3		40
+#define GPIOF_4		41
+#define GPIOF_5		42
+#define GPIOF_6		43
+#define GPIOF_7		44
+#define GPIOF_8		45
+#define GPIOF_9		46
+#define GPIOF_10	47
+#define GPIOF_11	48
+#define GPIOF_12	49
+#define GPIOA_0		50
+#define GPIOA_1		51
+#define GPIOA_2		52
+#define GPIOA_3		53
+#define GPIOA_4		54
+#define GPIOA_5		55
+#define GPIOA_6		56
+#define GPIOA_7		57
+#define GPIOA_8		58
+#define GPIOA_9		59
+#define GPIOA_10	60
+#define GPIOA_11	61
+
+#endif /* _DT_BINDINGS_MESON_A1_GPIO_H */
-- 
1.9.1

[PATCH v2 3/3] arm64: dts: meson: a1: add pinctrl controller support

[Qianggui Song]

add peripheral pinctrl controller to a1 soc

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 7210ad049d1d..0965259af869 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
 
 / {
 	compatible = "amlogic,a1";
@@ -74,6 +75,23 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
 
+			periphs_pinctrl: pinctrl@0400 {
+				compatible = "amlogic,meson-a1-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@0400 {
+					reg = <0x0 0x0400 0x0 0x003c>,
+					      <0x0 0x0480 0x0 0x0118>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 62>;
+				};
+
+			};
+
 			uart_AO: serial@1c00 {
 				compatible = "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
-- 
1.9.1