From: Mirela Rabulea <mirela.rabulea@nxp.com>
To: mchehab@kernel.org, shawnguo@kernel.org, robh+dt@kernel.org
Cc: hverkuil-cisco@xs4all.nl, paul.kocialkowski@bootlin.com,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-imx@nxp.com, s.hauer@pengutronix.de, aisheng.dong@nxp.com,
daniel.baluta@nxp.com, leonard.crestez@nxp.com,
robert.chiras@nxp.com, laurentiu.palcu@nxp.com,
mark.rutland@arm.com, devicetree@vger.kernel.org,
p.zabel@pengutronix.de,
laurent.pinchart+renesas@ideasonboard.com,
niklas.soderlund+renesas@ragnatech.se,
dafna.hirschfeld@collabora.com,
Mirela Rabulea <mirela.rabulea@nxp.com>
Subject: [PATCH 3/5] media: dt-bindings: Add bindings for i.MX8QXP/QM JPEG driver
Date: Wed, 6 Nov 2019 17:20:31 +0200 [thread overview]
Message-ID: <1573053633-21437-4-git-send-email-mirela.rabulea@nxp.com> (raw)
In-Reply-To: <1573053633-21437-1-git-send-email-mirela.rabulea@nxp.com>
Add bindings documentation for i.MX8QXP/QM JPEG decoder & encoder driver.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
---
.../devicetree/bindings/media/imx8-jpeg.yaml | 83 ++++++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/imx8-jpeg.yaml
diff --git a/Documentation/devicetree/bindings/media/imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/imx8-jpeg.yaml
new file mode 100644
index 0000000..2df538d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/imx8-jpeg.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/imx8-jpeg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QXP/QM JPEG decoder/encoder Device Tree Bindings
+
+maintainers:
+ - Mirela Rabulea <mirela.rabulea@nxp.com>
+
+description: |-
+ The JPEG decoder/encoder present in.MXQXP/QM SoC is an
+ ISO/IEC 10918-1 JPEG standard compliant decoder/encoder, for Baseline
+ and Extended Sequential DCT modes.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # JPEG decoder
+ - fsl,imx8-jpgdec
+ # JPEG encoder
+ - fsl,imx8-jpgenc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ There are 4 slots available in the IP
+ If a certain slot is used, it should have an associated interrupt
+ minItems: 1 # At least one slot should be available
+ maxItems: 4 # The IP has 4 slots available for use
+
+ power-domains:
+ description:
+ List of phandle and PM domain specifier as documented in
+ Documentation/devicetree/bindings/power/power_domain.txt
+ minItems: 2 # Wrapper and 1 slot
+ maxItems: 5 # Wrapper and 4 slots
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ jpegdec: jpegdec@58400000 {
+ compatible = "fsl,imx8-jpgdec";
+ reg = <0x58400000 0x00050000 >;
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
+ <&pd IMX_SC_R_MJPEG_DEC_S0>,
+ <&pd IMX_SC_R_MJPEG_DEC_S1>,
+ <&pd IMX_SC_R_MJPEG_DEC_S2>,
+ <&pd IMX_SC_R_MJPEG_DEC_S3>;
+ };
+
+ jpegenc: jpegenc@58450000 {
+ compatible = "fsl,imx8-jpgenc";
+ reg = <0x58450000 0x00050000 >;
+ interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
+ <&pd IMX_SC_R_MJPEG_ENC_S0>,
+ <&pd IMX_SC_R_MJPEG_ENC_S1>,
+ <&pd IMX_SC_R_MJPEG_ENC_S2>,
+ <&pd IMX_SC_R_MJPEG_ENC_S3>;
+ };
+...
--
2.7.4
next prev parent reply other threads:[~2019-11-06 15:21 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 15:20 [PATCH 0/5] Add V4L2 driver for i.MX8 JPEG Encoder/Decoder Mirela Rabulea
2019-11-06 15:20 ` [PATCH 1/5] media: v4l: Add packed YUV444 24bpp pixel format Mirela Rabulea
2019-11-06 15:20 ` [PATCH 2/5] firmware: imx: scu-pd: Add power domains for imx-jpeg Mirela Rabulea
2019-12-13 9:49 ` Hans Verkuil
2019-12-13 10:49 ` Daniel Baluta
2019-12-16 9:15 ` Shawn Guo
2019-11-06 15:20 ` Mirela Rabulea [this message]
2019-11-13 3:55 ` [PATCH 3/5] media: dt-bindings: Add bindings for i.MX8QXP/QM JPEG driver Rob Herring
2019-11-06 15:20 ` [PATCH 4/5] media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder Mirela Rabulea
2019-11-13 14:00 ` Ezequiel Garcia
2019-11-13 14:59 ` [EXT] " Mirela Rabulea
2019-11-13 15:13 ` Philipp Zabel
2019-11-06 15:20 ` [PATCH 5/5] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes Mirela Rabulea
2019-11-06 15:37 ` [PATCH 0/5] Add V4L2 driver for i.MX8 JPEG Encoder/Decoder Hans Verkuil
2019-11-06 16:45 ` [EXT] " Mirela Rabulea
2019-11-06 16:52 ` Hans Verkuil
2019-11-08 13:36 ` Mirela Rabulea
2019-11-08 14:06 ` Hans Verkuil
2019-11-11 19:27 ` Nicolas Dufresne
2019-11-15 12:34 ` Mirela Rabulea
2019-11-12 16:17 ` Ezequiel Garcia
2019-11-13 12:52 ` [EXT] " Mirela Rabulea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1573053633-21437-4-git-send-email-mirela.rabulea@nxp.com \
--to=mirela.rabulea@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=dafna.hirschfeld@collabora.com \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=laurentiu.palcu@nxp.com \
--cc=leonard.crestez@nxp.com \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=p.zabel@pengutronix.de \
--cc=paul.kocialkowski@bootlin.com \
--cc=robert.chiras@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).