* [PATCH v6 1/3] arm64: dts: qcom: sc7180: Add cpuidle low power states
[not found] <1582277527-19638-1-git-send-email-mkshah@codeaurora.org>
@ 2020-02-21 9:32 ` Maulik Shah
2020-02-24 6:41 ` Srinivas Rao L
0 siblings, 1 reply; 2+ messages in thread
From: Maulik Shah @ 2020-02-21 9:32 UTC (permalink / raw)
To: swboyd, mka, evgreen, bjorn.andersson
Cc: linux-kernel, linux-arm-msm, agross, dianders, rnayak, ilina,
lsrao, Maulik Shah, devicetree
Add device bindings for cpuidle states for cpu devices.
Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index cc5a94f..2941a7e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -86,6 +86,9 @@
compatible = "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -103,6 +106,9 @@
compatible = "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_100>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -117,6 +123,9 @@
compatible = "arm,armv8";
reg = <0x0 0x200>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_200>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -131,6 +140,9 @@
compatible = "arm,armv8";
reg = <0x0 0x300>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_300>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -145,6 +157,9 @@
compatible = "arm,armv8";
reg = <0x0 0x400>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_400>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -159,6 +174,9 @@
compatible = "arm,armv8";
reg = <0x0 0x500>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_500>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -173,6 +191,9 @@
compatible = "arm,armv8";
reg = <0x0 0x600>;
enable-method = "psci";
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_600>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
@@ -187,6 +208,9 @@
compatible = "arm,armv8";
reg = <0x0 0x700>;
enable-method = "psci";
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_700>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
@@ -195,6 +219,60 @@
next-level-cache = <&L3_0>;
};
};
+
+ idle-states {
+ entry-method = "psci";
+
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-power-down";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <549>;
+ exit-latency-us = <901>;
+ min-residency-us = <1774>;
+ local-timer-stop;
+ };
+
+ LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-rail-power-down";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <702>;
+ exit-latency-us = <915>;
+ min-residency-us = <4001>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-power-down";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <523>;
+ exit-latency-us = <1244>;
+ min-residency-us = <2207>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-rail-power-down";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <526>;
+ exit-latency-us = <1854>;
+ min-residency-us = <5555>;
+ local-timer-stop;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "cluster-power-down";
+ arm,psci-suspend-param = <0x40003444>;
+ entry-latency-us = <3263>;
+ exit-latency-us = <6562>;
+ min-residency-us = <9926>;
+ local-timer-stop;
+ };
+ };
};
memory@80000000 {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v6 1/3] arm64: dts: qcom: sc7180: Add cpuidle low power states
2020-02-21 9:32 ` [PATCH v6 1/3] arm64: dts: qcom: sc7180: Add cpuidle low power states Maulik Shah
@ 2020-02-24 6:41 ` Srinivas Rao L
0 siblings, 0 replies; 2+ messages in thread
From: Srinivas Rao L @ 2020-02-24 6:41 UTC (permalink / raw)
To: Maulik Shah, swboyd, mka, evgreen, bjorn.andersson
Cc: linux-kernel, linux-arm-msm, agross, dianders, rnayak, ilina,
devicetree
Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
Regards,
Srinivas.
On 2/21/2020 3:02 PM, Maulik Shah wrote:
> Add device bindings for cpuidle states for cpu devices.
>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 78 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index cc5a94f..2941a7e 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -86,6 +86,9 @@
> compatible = "arm,armv8";
> reg = <0x0 0x0>;
> enable-method = "psci";
> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
> + &LITTLE_CPU_SLEEP_1
> + &CLUSTER_SLEEP_0>;
> next-level-cache = <&L2_0>;
> #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -103,6 +106,9 @@
> compatible = "arm,armv8";
> reg = <0x0 0x100>;
> enable-method = "psci";
> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
> + &LITTLE_CPU_SLEEP_1
> + &CLUSTER_SLEEP_0>;
> next-level-cache = <&L2_100>;
> #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -117,6 +123,9 @@
> compatible = "arm,armv8";
> reg = <0x0 0x200>;
> enable-method = "psci";
> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
> + &LITTLE_CPU_SLEEP_1
> + &CLUSTER_SLEEP_0>;
> next-level-cache = <&L2_200>;
> #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -131,6 +140,9 @@
> compatible = "arm,armv8";
> reg = <0x0 0x300>;
> enable-method = "psci";
> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
> + &LITTLE_CPU_SLEEP_1
> + &CLUSTER_SLEEP_0>;
> next-level-cache = <&L2_300>;
> #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -145,6 +157,9 @@
> compatible = "arm,armv8";
> reg = <0x0 0x400>;
> enable-method = "psci";
> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
> + &LITTLE_CPU_SLEEP_1
> + &CLUSTER_SLEEP_0>;
> next-level-cache = <&L2_400>;
> #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -159,6 +174,9 @@
> compatible = "arm,armv8";
> reg = <0x0 0x500>;
> enable-method = "psci";
> + cpu-idle-states = <&LITTLE_CPU_SLEEP_0
> + &LITTLE_CPU_SLEEP_1
> + &CLUSTER_SLEEP_0>;
> next-level-cache = <&L2_500>;
> #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 0>;
> @@ -173,6 +191,9 @@
> compatible = "arm,armv8";
> reg = <0x0 0x600>;
> enable-method = "psci";
> + cpu-idle-states = <&BIG_CPU_SLEEP_0
> + &BIG_CPU_SLEEP_1
> + &CLUSTER_SLEEP_0>;
> next-level-cache = <&L2_600>;
> #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 1>;
> @@ -187,6 +208,9 @@
> compatible = "arm,armv8";
> reg = <0x0 0x700>;
> enable-method = "psci";
> + cpu-idle-states = <&BIG_CPU_SLEEP_0
> + &BIG_CPU_SLEEP_1
> + &CLUSTER_SLEEP_0>;
> next-level-cache = <&L2_700>;
> #cooling-cells = <2>;
> qcom,freq-domain = <&cpufreq_hw 1>;
> @@ -195,6 +219,60 @@
> next-level-cache = <&L3_0>;
> };
> };
> +
> + idle-states {
> + entry-method = "psci";
> +
> + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
> + compatible = "arm,idle-state";
> + idle-state-name = "little-power-down";
> + arm,psci-suspend-param = <0x40000003>;
> + entry-latency-us = <549>;
> + exit-latency-us = <901>;
> + min-residency-us = <1774>;
> + local-timer-stop;
> + };
> +
> + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
> + compatible = "arm,idle-state";
> + idle-state-name = "little-rail-power-down";
> + arm,psci-suspend-param = <0x40000004>;
> + entry-latency-us = <702>;
> + exit-latency-us = <915>;
> + min-residency-us = <4001>;
> + local-timer-stop;
> + };
> +
> + BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
> + compatible = "arm,idle-state";
> + idle-state-name = "big-power-down";
> + arm,psci-suspend-param = <0x40000003>;
> + entry-latency-us = <523>;
> + exit-latency-us = <1244>;
> + min-residency-us = <2207>;
> + local-timer-stop;
> + };
> +
> + BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
> + compatible = "arm,idle-state";
> + idle-state-name = "big-rail-power-down";
> + arm,psci-suspend-param = <0x40000004>;
> + entry-latency-us = <526>;
> + exit-latency-us = <1854>;
> + min-residency-us = <5555>;
> + local-timer-stop;
> + };
> +
> + CLUSTER_SLEEP_0: cluster-sleep-0 {
> + compatible = "arm,idle-state";
> + idle-state-name = "cluster-power-down";
> + arm,psci-suspend-param = <0x40003444>;
> + entry-latency-us = <3263>;
> + exit-latency-us = <6562>;
> + min-residency-us = <9926>;
> + local-timer-stop;
> + };
> + };
> };
>
> memory@80000000 {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-02-24 6:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1582277527-19638-1-git-send-email-mkshah@codeaurora.org>
2020-02-21 9:32 ` [PATCH v6 1/3] arm64: dts: qcom: sc7180: Add cpuidle low power states Maulik Shah
2020-02-24 6:41 ` Srinivas Rao L
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).