Re: [PATCH v3 02/13] mailbox: cmdq: variablize address shift in platform

[CK Hu <ck.hu@mediatek.com>]

Hi, Dennis:

On Fri, 2020-02-28 at 21:44 +0800, Dennis YC Hsieh wrote:
> Some gce hardware shift pc and end address in register to support
> large dram addressing.
> Implement gce address shift when write or read pc and end register.
> And add shift bit in platform definition.
> 
> Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c       | 57 ++++++++++++++++++------
>  drivers/soc/mediatek/mtk-cmdq-helper.c   |  3 +-
>  include/linux/mailbox/mtk-cmdq-mailbox.h |  2 +
>  3 files changed, 48 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 9a6ce9f5a7db..a98f0357dd7d 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -76,8 +76,22 @@ struct cmdq {
>  	struct cmdq_thread	*thread;
>  	struct clk		*clock;
>  	bool			suspended;
> +	u8			shift_pa;
>  };
>  
> +struct gce_plat {
> +	u32 thread_nr;
> +	u8 shift;
> +};
> +
> +u8 cmdq_mbox_shift(struct mbox_chan *chan)
> +{
> +	struct cmdq *cmdq = container_of(chan->mbox, struct cmdq, mbox);
> +
> +	return cmdq->shift_pa;
> +}
> +EXPORT_SYMBOL(cmdq_mbox_shift);
> +
>  static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread)
>  {
>  	u32 status;
> @@ -183,7 +197,7 @@ static void cmdq_task_remove_wfe(struct cmdq_task *task)
>  	for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++)
>  		if (cmdq_command_is_wfe(base[i]))
>  			base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 |
> -				  CMDQ_JUMP_PASS;
> +				  CMDQ_JUMP_PASS >> task->cmdq->shift_pa;
>  	dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size,
>  				   DMA_TO_DEVICE);
>  }
> @@ -221,13 +235,15 @@ static void cmdq_task_handle_error(struct cmdq_task *task)
>  {
>  	struct cmdq_thread *thread = task->thread;
>  	struct cmdq_task *next_task;
> +	struct cmdq *cmdq = task->cmdq;
>  
>  	dev_err(task->cmdq->mbox.dev, "task 0x%p error\n", task);
>  	WARN_ON(cmdq_thread_suspend(task->cmdq, thread) < 0);

If you invent local variable 'cmdq', I think you could replace all
task->cmdq with cmdq in this function.

>  	next_task = list_first_entry_or_null(&thread->task_busy_list,
>  			struct cmdq_task, list_entry);
>  	if (next_task)
> -		writel(next_task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> +		writel(next_task->pa_base >> cmdq->shift_pa,
> +		       thread->base + CMDQ_THR_CURR_ADDR);
>  	cmdq_thread_resume(thread);
>  }
>  
> @@ -257,7 +273,7 @@ static void cmdq_thread_irq_handler(struct cmdq *cmdq,
>  	else
>  		return;
>  
> -	curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
> +	curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) << cmdq->shift_pa;
>  
>  	list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
>  				 list_entry) {
> @@ -373,16 +389,20 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
>  		WARN_ON(clk_enable(cmdq->clock) < 0);
>  		WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
>  
> -		writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> -		writel(task->pa_base + pkt->cmd_buf_size,
> +		writel(task->pa_base >> cmdq->shift_pa,
> +		       thread->base + CMDQ_THR_CURR_ADDR);
> +		writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa,
>  		       thread->base + CMDQ_THR_END_ADDR);
> +
>  		writel(thread->priority, thread->base + CMDQ_THR_PRIORITY);
>  		writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
>  		writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
>  	} else {
>  		WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> -		curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
> -		end_pa = readl(thread->base + CMDQ_THR_END_ADDR);
> +		curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) <<
> +			cmdq->shift_pa;
> +		end_pa = readl(thread->base + CMDQ_THR_END_ADDR) <<
> +			cmdq->shift_pa;
>  
>  		/*
>  		 * Atomic execution should remove the following wfe, i.e. only
> @@ -395,7 +415,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
>  				cmdq_thread_wait_end(thread, end_pa);
>  				WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
>  				/* set to this task directly */
> -				writel(task->pa_base,
> +				writel(task->pa_base >> cmdq->shift_pa,
>  				       thread->base + CMDQ_THR_CURR_ADDR);
>  			} else {
>  				cmdq_task_insert_into_thread(task);
> @@ -407,14 +427,14 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
>  			if (curr_pa == end_pa - CMDQ_INST_SIZE ||
>  			    curr_pa == end_pa) {
>  				/* set to this task directly */
> -				writel(task->pa_base,
> +				writel(task->pa_base >> cmdq->shift_pa,
>  				       thread->base + CMDQ_THR_CURR_ADDR);
>  			} else {
>  				cmdq_task_insert_into_thread(task);
>  				smp_mb(); /* modify jump before enable thread */
>  			}
>  		}
> -		writel(task->pa_base + pkt->cmd_buf_size,
> +		writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa,
>  		       thread->base + CMDQ_THR_END_ADDR);
>  		cmdq_thread_resume(thread);
>  	}
> @@ -461,6 +481,7 @@ static int cmdq_probe(struct platform_device *pdev)
>  	struct resource *res;
>  	struct cmdq *cmdq;
>  	int err, i;
> +	struct gce_plat *plat_data;
>  
>  	cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL);
>  	if (!cmdq)
> @@ -479,7 +500,14 @@ static int cmdq_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> -	cmdq->thread_nr = (u32)(unsigned long)of_device_get_match_data(dev);
> +	plat_data = (struct gce_plat *)of_device_get_match_data(dev);
> +	if (!plat_data) {
> +		dev_err(dev, "failed to get match data\n");
> +		return -EINVAL;
> +	}
> +
> +	cmdq->thread_nr = plat_data->thread_nr;
> +	cmdq->shift_pa = plat_data->shift;
>  	cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0);
>  	err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
>  			       "mtk_cmdq", cmdq);
> @@ -542,9 +570,12 @@ static const struct dev_pm_ops cmdq_pm_ops = {
>  	.resume = cmdq_resume,
>  };
>  
> +static const struct gce_plat gce_plat_v2 = {.thread_nr = 16};
> +static const struct gce_plat gce_plat_v3 = {.thread_nr = 24};
> +
>  static const struct of_device_id cmdq_of_ids[] = {
> -	{.compatible = "mediatek,mt8173-gce", .data = (void *)16},
> -	{.compatible = "mediatek,mt8183-gce", .data = (void *)24},
> +	{.compatible = "mediatek,mt8173-gce", .data = (void *)&gce_plat_v2},
> +	{.compatible = "mediatek,mt8183-gce", .data = (void *)&gce_plat_v3},
>  	{}
>  };
>  
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index de20e6cba83b..2e1bc513569b 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -291,7 +291,8 @@ static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
>  
>  	/* JUMP to end */
>  	inst.op = CMDQ_CODE_JUMP;
> -	inst.value = CMDQ_JUMP_PASS;
> +	inst.value = CMDQ_JUMP_PASS >>
> +		cmdq_mbox_shift(((struct cmdq_client *)pkt->cl)->chan);

Why not just cmdq_mbox_shift(pkt->cl->chan) ?

Regards,
CK

>  	err = cmdq_pkt_append_command(pkt, inst);
>  
>  	return err;
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index a4dc45fbec0a..dfe5b2eb85cc 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -88,4 +88,6 @@ struct cmdq_pkt {
>  	void			*cl;
>  };
>  
> +u8 cmdq_mbox_shift(struct mbox_chan *chan);
> +
>  #endif /* __MTK_CMDQ_MAILBOX_H__ */