From: Rajeshwari <rkambl@codeaurora.org>
To: Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, sanm@codeaurora.org,
sivaa@codeaurora.org, Rajeshwari <rkambl@codeaurora.org>
Subject: [PATCH 1/1] arm64: dts: qcom: sc7180: Added critical trip point Thermal-zones node
Date: Wed, 4 Mar 2020 17:53:55 +0530 [thread overview]
Message-ID: <1583324635-8271-2-git-send-email-rkambl@codeaurora.org> (raw)
In-Reply-To: <1583324635-8271-1-git-send-email-rkambl@codeaurora.org>
To enable kernel critical shutdown feature added critical trip point to
all non CPU sensors to perform shutdown in orderly manner.
Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index b8a72cf..7e5f14f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1956,6 +1956,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ aoss0_crit: aoss0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2011,6 +2017,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ gpuss0_crit: gpuss0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2026,6 +2038,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ gpuss1_crit: gpuss1_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2041,6 +2059,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ aoss1_crit: aoss1_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2056,6 +2080,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ cwlan_crit: cwlan_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2071,6 +2101,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ audio_crit: audio_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2086,6 +2122,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ ddr_crit: ddr_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2101,6 +2143,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ q6_hvx_crit: q6_hvx_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2116,6 +2164,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ camera_crit: camera_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2131,6 +2185,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ mdm_crit: mdm_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2146,6 +2206,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ mdm_dsp_crit: mdm_dsp_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2161,6 +2227,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ npu_crit: npu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2176,6 +2248,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ video_crit: video_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2020-03-04 12:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-04 12:23 [PATCH 0/1] Added critical trip point Thermal-zones node Rajeshwari
2020-03-04 12:23 ` Rajeshwari [this message]
2020-03-05 5:19 ` [PATCH 1/1] arm64: dts: qcom: sc7180: " Bjorn Andersson
-- strict thread matches above, loose matches on Subject: below --
2020-03-05 7:49 [PATCH 0/1] " Rajeshwari
2020-03-05 7:49 ` [PATCH 1/1] arm64: dts: qcom: sc7180: " Rajeshwari
2020-03-05 12:59 ` Amit Kucheria
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1583324635-8271-2-git-send-email-rkambl@codeaurora.org \
--to=rkambl@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sanm@codeaurora.org \
--cc=sivaa@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).