From: Rajeshwari <rkambl@codeaurora.org>
To: Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, sanm@codeaurora.org,
sivaa@codeaurora.org, Rajeshwari <rkambl@codeaurora.org>
Subject: [PATCH 1/1] arm64: dts: qcom: sc7180: Added critical trip point Thermal-zones node
Date: Thu, 5 Mar 2020 13:19:07 +0530 [thread overview]
Message-ID: <1583394547-12779-2-git-send-email-rkambl@codeaurora.org> (raw)
In-Reply-To: <1583394547-12779-1-git-send-email-rkambl@codeaurora.org>
To enable kernel critical shutdown feature added critical trip point to
all non CPU sensors to perform shutdown in orderly manner.
Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 253274d..ca876ed 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2366,6 +2366,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ aoss0_crit: aoss0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2421,6 +2427,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ gpuss0_crit: gpuss0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2436,6 +2448,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ gpuss1_crit: gpuss1_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2451,6 +2469,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ aoss1_crit: aoss1_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2466,6 +2490,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ cwlan_crit: cwlan_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2481,6 +2511,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ audio_crit: audio_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2496,6 +2532,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ ddr_crit: ddr_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2511,6 +2553,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ q6_hvx_crit: q6_hvx_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2526,6 +2574,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ camera_crit: camera_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2541,6 +2595,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ mdm_crit: mdm_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2556,6 +2616,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ mdm_dsp_crit: mdm_dsp_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2571,6 +2637,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ npu_crit: npu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
@@ -2586,6 +2658,12 @@
hysteresis = <2000>;
type = "hot";
};
+
+ video_crit: video_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2020-03-05 7:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-05 7:49 [PATCH 0/1] Added critical trip point Thermal-zones node Rajeshwari
2020-03-05 7:49 ` Rajeshwari [this message]
2020-03-05 12:59 ` [PATCH 1/1] arm64: dts: qcom: sc7180: " Amit Kucheria
-- strict thread matches above, loose matches on Subject: below --
2020-03-04 12:23 [PATCH 0/1] " Rajeshwari
2020-03-04 12:23 ` [PATCH 1/1] arm64: dts: qcom: sc7180: " Rajeshwari
2020-03-05 5:19 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1583394547-12779-2-git-send-email-rkambl@codeaurora.org \
--to=rkambl@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sanm@codeaurora.org \
--cc=sivaa@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).