From: Anson Huang <Anson.Huang@nxp.com>
To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com,
andrew.smirnov@gmail.com, manivannan.sadhasivam@linaro.org,
michael@walle.cc, rjones@gateworks.com,
marcel.ziswiler@toradex.com, sebastien.szymanski@armadeus.com,
jon@solid-run.com, cosmin.stoica@nxp.com, l.stach@pengutronix.de,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Linux-imx@nxp.com
Subject: [PATCH 2/3] arm64: dts: imx8dxl: Add i.MX8DXL evk board support
Date: Sat, 28 Mar 2020 19:13:34 +0800 [thread overview]
Message-ID: <1585394015-27825-2-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1585394015-27825-1-git-send-email-Anson.Huang@nxp.com>
Add i.MX8DXL EVK board support, currently ONLY supports lpuart0,
usdhc1, usdhc2 and scu power key drivers.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
This patch needs pads-imx8dxl.h which is in below patch series:
https://patchwork.kernel.org/patch/11462211/
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 167 ++++++++++++++++++++++++++
2 files changed, 168 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a39f0a1..425ca44 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
new file mode 100644
index 0000000..1200b70
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxl.dtsi"
+
+/ {
+ model = "Freescale i.MX8DXL EVK";
+ compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
+
+ chosen {
+ stdout-path = &adma_lpuart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ };
+
+ reg_usdhc2_vmmc: usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "SD1_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ off-on-delay-us = <3480>;
+ };
+};
+
+&adma_lpuart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ status = "okay";
+};
+
+&scu_key {
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ IMX8DXL_UART0_RX_ADMA_UART0_RX 0x0600004c
+ IMX8DXL_UART0_TX_ADMA_UART0_TX 0x0600004c
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x00000040
+ IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x00000021
+ IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041
+ IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
+ IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041
+ IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
+ IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041
+ IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
+ IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
+ IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+};
--
2.7.4
next prev parent reply other threads:[~2020-03-28 11:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-28 11:13 [PATCH 1/3] arm64: dts: imx: Add imx8dxl support Anson Huang
2020-03-28 11:13 ` Anson Huang [this message]
2020-03-28 11:13 ` [PATCH 3/3] dt-bindings: arm: imx: Add the i.MX8DXL EVK board Anson Huang
2020-04-05 2:10 ` Rob Herring
2020-04-18 12:37 ` [PATCH 1/3] arm64: dts: imx: Add imx8dxl support Aisheng Dong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1585394015-27825-2-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=andrew.smirnov@gmail.com \
--cc=cosmin.stoica@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=jon@solid-run.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=marcel.ziswiler@toradex.com \
--cc=michael@walle.cc \
--cc=rjones@gateworks.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sebastien.szymanski@armadeus.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).