From: Amit Singh Tomar <amittomer25@gmail.com>
To: andre.przywara@arm.com, afaerber@suse.de,
manivannan.sadhasivam@linaro.org, robh+dt@kernel.org
Cc: cristian.ciocaltea@gmail.com,
linux-arm-kernel@lists.infradead.org,
linux-actions@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH RFC 8/8] arm64: dts: actions: Add uSD support for Cubieboard7
Date: Wed, 6 May 2020 16:06:10 +0530 [thread overview]
Message-ID: <1588761371-9078-9-git-send-email-amittomer25@gmail.com> (raw)
In-Reply-To: <1588761371-9078-1-git-send-email-amittomer25@gmail.com>
This commit adds uSD support for Cubieboard7 board based on Actions Semi
S700 SoC. SD0 is connected to uSD slot. Since there is no PMIC support
added yet, fixed regulator has been used as a regulator node.
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 41 ++++++++++++++++++++++++
arch/arm64/boot/dts/actions/s700.dtsi | 1 +
2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
index 63e375cd9eb4..ec117eb12f3a 100644
--- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
+++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
@@ -13,6 +13,7 @@
aliases {
serial3 = &uart3;
+ mmc0 = &mmc0;
};
chosen {
@@ -28,6 +29,23 @@
device_type = "memory";
reg = <0x1 0xe0000000 0x0 0x0>;
};
+
+ /* Fixed regulator used in the absence of PMIC */
+ vcc_3v1: vcc-3v1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.1V";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ };
+
+ /* Fixed regulator used in the absence of PMIC */
+ sd_vcc: sd-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.1V";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
};
&i2c0 {
@@ -81,6 +99,14 @@
bias-pull-up;
};
};
+
+ mmc0_default: mmc0_default {
+ pinmux {
+ groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+ "sd0_cmd_mfp", "sd0_clk_mfp";
+ function = "sd0";
+ };
+ };
};
&timer {
@@ -90,3 +116,18 @@
&uart3 {
status = "okay";
};
+
+/* uSD */
+&mmc0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_default>;
+ cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
+ no-sdio;
+ no-mmc;
+ no-1-8-v;
+ bus-width = <4>;
+ vmmc-supply = <&sd_vcc>;
+ vqmmc-supply = <&sd_vcc>;
+};
+
diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 3f1fc3e48415..8a541dd48f61 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/clock/actions,s700-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/actions,s700-reset.h>
--
2.7.4
prev parent reply other threads:[~2020-05-06 10:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1588761371-9078-1-git-send-email-amittomer25@gmail.com>
2020-05-06 10:36 ` [PATCH RFC 4/8] arm64: dts: actions: disable sps node from S700 Amit Singh Tomar
2020-05-07 10:15 ` André Przywara
2020-05-06 10:36 ` [PATCH RFC 5/8] arm64: dts: actions: Add DMA Controller for S700 Amit Singh Tomar
2020-05-06 10:36 ` [PATCH RFC 6/8] dt-bindings: reset: s700: Add binding constants for mmc Amit Singh Tomar
2020-05-14 15:08 ` Rob Herring
2020-05-06 10:36 ` [PATCH RFC 7/8] arm64: dts: actions: Add MMC controller support for S700 Amit Singh Tomar
2020-05-06 10:36 ` Amit Singh Tomar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1588761371-9078-9-git-send-email-amittomer25@gmail.com \
--to=amittomer25@gmail.com \
--cc=afaerber@suse.de \
--cc=andre.przywara@arm.com \
--cc=cristian.ciocaltea@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-actions@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).