[PATCH] dt-bindings: regulator: Convert anatop regulator to json-schema

[Anson Huang <Anson.Huang@nxp.com>]

Convert the anatop regulator binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 .../bindings/regulator/anatop-regulator.txt        | 40 ---------
 .../bindings/regulator/anatop-regulator.yaml       | 94 ++++++++++++++++++++++
 2 files changed, 94 insertions(+), 40 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/anatop-regulator.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/anatop-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
deleted file mode 100644
index a3106c7..0000000
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Anatop Voltage regulators
-
-Required properties:
-- compatible: Must be "fsl,anatop-regulator"
-- regulator-name: A string used as a descriptive name for regulator outputs
-- anatop-reg-offset: Anatop MFD register offset
-- anatop-vol-bit-shift: Bit shift for the register
-- anatop-vol-bit-width: Number of bits used in the register
-- anatop-min-bit-val: Minimum value of this register
-- anatop-min-voltage: Minimum voltage of this regulator
-- anatop-max-voltage: Maximum voltage of this regulator
-
-Optional properties:
-- anatop-delay-reg-offset: Anatop MFD step time register offset
-- anatop-delay-bit-shift: Bit shift for the step time register
-- anatop-delay-bit-width: Number of bits used in the step time register
-- vin-supply: The supply for this regulator
-- anatop-enable-bit: Regulator enable bit offset
-
-Any property defined as part of the core regulator
-binding, defined in regulator.txt, can also be used.
-
-Example:
-
-	regulator-vddpu {
-		compatible = "fsl,anatop-regulator";
-		regulator-name = "vddpu";
-		regulator-min-microvolt = <725000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-always-on;
-		anatop-reg-offset = <0x140>;
-		anatop-vol-bit-shift = <9>;
-		anatop-vol-bit-width = <5>;
-		anatop-delay-reg-offset = <0x170>;
-		anatop-delay-bit-shift = <24>;
-		anatop-delay-bit-width = <2>;
-		anatop-min-bit-val = <1>;
-		anatop-min-voltage = <725000>;
-		anatop-max-voltage = <1300000>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
new file mode 100644
index 0000000..a8c9dd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Anatop Voltage Regulators
+
+maintainers:
+  - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: fsl,anatop-regulator
+
+  regulator-name:
+    $ref: '/schemas/types.yaml#/definitions/string'
+    description: string used as a descriptive name for regulator outputs
+
+  anatop-reg-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the anatop MFD register offset.
+
+  anatop-vol-bit-shift:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the bit shift for the register.
+
+  anatop-vol-bit-width:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of bits used in the register.
+
+  anatop-min-bit-val:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the minimum value of this register.
+
+  anatop-min-voltage:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the minimum voltage of this regulator.
+
+  anatop-max-voltage:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the maximum voltage of this regulator.
+
+  anatop-delay-reg-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the anatop MFD step time register offset.
+
+  anatop-delay-bit-shift:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the bit shift for the step time register.
+
+  anatop-delay-bit-width:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of bits used in the step time register.
+
+  anatop-enable-bit:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing regulator enable bit offset.
+
+  vin-supply:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: input supply phandle.
+
+required:
+  - compatible
+  - regulator-name
+  - anatop-reg-offset
+  - anatop-vol-bit-shift
+  - anatop-vol-bit-width
+  - anatop-min-bit-val
+  - anatop-min-voltage
+  - anatop-max-voltage
+
+examples:
+  - |
+    regulator-vddpu {
+        compatible = "fsl,anatop-regulator";
+        regulator-name = "vddpu";
+        regulator-min-microvolt = <725000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-always-on;
+        anatop-reg-offset = <0x140>;
+        anatop-vol-bit-shift = <9>;
+        anatop-vol-bit-width = <5>;
+        anatop-delay-reg-offset = <0x170>;
+        anatop-delay-bit-shift = <24>;
+        anatop-delay-bit-width = <2>;
+        anatop-min-bit-val = <1>;
+        anatop-min-voltage = <725000>;
+        anatop-max-voltage = <1300000>;
+    };
-- 
2.7.4