[PATCH V2 2/3] dt-bindings: timer: Convert i.MX TPM to json-schema

[Anson Huang <Anson.Huang@nxp.com>]

Convert the i.MX TPM binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
---
Changes since V1:
	- remove unnecessary maxItems for clocks/clock-names.
---
 .../devicetree/bindings/timer/nxp,tpm-timer.txt    | 28 ----------
 .../devicetree/bindings/timer/nxp,tpm-timer.yaml   | 61 ++++++++++++++++++++++
 2 files changed, 61 insertions(+), 28 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
 create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml

diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
deleted file mode 100644
index f82087b..0000000
--- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NXP Low Power Timer/Pulse Width Modulation Module (TPM)
-
-The Timer/PWM Module (TPM) supports input capture, output compare,
-and the generation of PWM signals to control electric motor and power
-management applications. The counter, compare and capture registers
-are clocked by an asynchronous clock that can remain enabled in low
-power modes. TPM can support global counter bus where one TPM drives
-the counter bus for the others, provided bit width is the same.
-
-Required properties:
-
-- compatible :	should be "fsl,imx7ulp-tpm"
-- reg :		Specifies base physical address and size of the register sets
-		for the clock event device and clock source device.
-- interrupts :	Should be the clock event device interrupt.
-- clocks :	The clocks provided by the SoC to drive the timer, must contain
-		an entry for each entry in clock-names.
-- clock-names : Must include the following entries: "ipg" and "per".
-
-Example:
-tpm5: tpm@40260000 {
-	compatible = "fsl,imx7ulp-tpm";
-	reg = <0x40260000 0x1000>;
-	interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
-		 <&clks IMX7ULP_CLK_LPTPM5>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
new file mode 100644
index 0000000..edd9585
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,tpm-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: |
+  The Timer/PWM Module (TPM) supports input capture, output compare,
+  and the generation of PWM signals to control electric motor and power
+  management applications. The counter, compare and capture registers
+  are clocked by an asynchronous clock that can remain enabled in low
+  power modes. TPM can support global counter bus where one TPM drives
+  the counter bus for the others, provided bit width is the same.
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-tpm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC TPM ipg clock
+      - description: SoC TPM per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@40260000 {
+        compatible = "fsl,imx7ulp-tpm";
+        reg = <0x40260000 0x1000>;
+        interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+                 <&pcc2 IMX7ULP_CLK_LPTPM5>;
+        clock-names = "ipg", "per";
+    };
-- 
2.7.4