From: Liu Ying <victor.liu@nxp.com>
To: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org, thierry.reding@gmail.com,
sam@ravnborg.org, linux-imx@nxp.com
Subject: [PATCH 2/2] drm/panel: simple: Add support for KOE TX26D202VM0BWA panel
Date: Mon, 1 Jun 2020 14:11:20 +0800 [thread overview]
Message-ID: <1590991880-24273-1-git-send-email-victor.liu@nxp.com> (raw)
This patch adds support for Kaohsiung Opto-Electronics Inc.
10.1" TX26D202VM0BWA WUXGA(1920x1200) TFT LCD panel with LVDS interface.
The panel has dual LVDS channels.
My panel is manufactured by US Micro Products(USMP). There is a tag at
the back of the panel, which indicates the panel type is 'TX26D202VM0BWA'
and it's made by KOE in Taiwan.
The panel spec from USMP can be found at:
https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192120NDU-A0.pdf
The below panel spec from KOE is basically the same to the one from USMP.
However, the panel type 'TX26D202VM0BAA' is a little bit different.
It looks that the two types of panel are compatible with each other.
http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index b6ecd15..7c222ec 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2200,6 +2200,37 @@ static const struct panel_desc koe_tx14d24vm1bpa = {
},
};
+static const struct display_timing koe_tx26d202vm0bwa_timing = {
+ .pixelclock = { 151820000, 156720000, 159780000 },
+ .hactive = { 1920, 1920, 1920 },
+ .hfront_porch = { 105, 130, 142 },
+ .hback_porch = { 45, 70, 82 },
+ .hsync_len = { 30, 30, 30 },
+ .vactive = { 1200, 1200, 1200},
+ .vfront_porch = { 3, 5, 10 },
+ .vback_porch = { 2, 5, 10 },
+ .vsync_len = { 5, 5, 5 },
+};
+
+static const struct panel_desc koe_tx26d202vm0bwa = {
+ .timings = &koe_tx26d202vm0bwa_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 217,
+ .height = 136,
+ },
+ .delay = {
+ .prepare = 1000,
+ .enable = 1000,
+ .unprepare = 1000,
+ .disable = 1000,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
static const struct display_timing koe_tx31d200vm0baa_timing = {
.pixelclock = { 39600000, 43200000, 48000000 },
.hactive = { 1280, 1280, 1280 },
@@ -3832,6 +3863,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "koe,tx14d24vm1bpa",
.data = &koe_tx14d24vm1bpa,
}, {
+ .compatible = "koe,tx26d202vm0bwa",
+ .data = &koe_tx26d202vm0bwa,
+ }, {
.compatible = "koe,tx31d200vm0baa",
.data = &koe_tx31d200vm0baa,
}, {
--
2.7.4
next reply other threads:[~2020-06-01 6:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-01 6:11 Liu Ying [this message]
2020-06-02 12:46 ` [PATCH 2/2] drm/panel: simple: Add support for KOE TX26D202VM0BWA panel Emil Velikov
2020-06-02 20:56 ` Sam Ravnborg
2020-06-03 17:15 ` Emil Velikov
2020-06-03 19:54 ` Sam Ravnborg
2020-06-05 15:48 ` Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1590991880-24273-1-git-send-email-victor.liu@nxp.com \
--to=victor.liu@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-imx@nxp.com \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).