From: Sharat Masetty <smasetty@codeaurora.org>
To: freedreno@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: dri-devel@freedesktop.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, jcrouse@codeaurora.org,
mka@chromium.org, sibis@codeaurora.org, saravanak@google.com,
viresh.kumar@linaro.org, robdclark@gmail.com,
Sharat Masetty <smasetty@codeaurora.org>
Subject: [PATCH v3 3/6] drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR
Date: Sat, 6 Jun 2020 09:55:48 +0530 [thread overview]
Message-ID: <1591417551-38051-4-git-send-email-smasetty@codeaurora.org> (raw)
In-Reply-To: <1591417551-38051-1-git-send-email-smasetty@codeaurora.org>
This patches replaces the previously used static DDR vote and uses
dev_pm_opp_set_bw() to scale GPU->DDR bandwidth along with scaling
GPU frequency. Also since the icc path voting is handled completely
in the opp driver, remove the icc_path handle and its usage in the
drm driver.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
---
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 23 ++++++++++++++++-------
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 8 --------
drivers/gpu/drm/msm/msm_gpu.h | 2 --
3 files changed, 16 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index 2d8124b..1dd8fc5 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -141,11 +141,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp)
gmu->freq = gmu->gpu_freqs[perf_index];
- /*
- * Eventually we will want to scale the path vote with the frequency but
- * for now leave it at max so that the performance is nominal.
- */
- icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
+ dev_pm_opp_set_bw(&gpu->pdev->dev, opp);
}
unsigned long a6xx_gmu_get_freq(struct msm_gpu *gpu)
@@ -715,6 +711,19 @@ static void a6xx_gmu_set_initial_freq(struct msm_gpu *gpu, struct a6xx_gmu *gmu)
dev_pm_opp_put(gpu_opp);
}
+static void a6xx_gmu_set_initial_bw(struct msm_gpu *gpu, struct a6xx_gmu *gmu)
+{
+ struct dev_pm_opp *gpu_opp;
+ unsigned long gpu_freq = gmu->gpu_freqs[gmu->current_perf_index];
+
+ gpu_opp = dev_pm_opp_find_freq_exact(&gpu->pdev->dev, gpu_freq, true);
+ if (IS_ERR_OR_NULL(gpu_opp))
+ return;
+
+ dev_pm_opp_set_bw(&gpu->pdev->dev, gpu_opp);
+ dev_pm_opp_put(gpu_opp);
+}
+
int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
{
struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
@@ -739,7 +748,7 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
}
/* Set the bus quota to a reasonable value for boot */
- icc_set_bw(gpu->icc_path, 0, MBps_to_icc(3072));
+ a6xx_gmu_set_initial_bw(gpu, gmu);
/* Enable the GMU interrupt */
gmu_write(gmu, REG_A6XX_GMU_AO_HOST_INTERRUPT_CLR, ~0);
@@ -907,7 +916,7 @@ int a6xx_gmu_stop(struct a6xx_gpu *a6xx_gpu)
a6xx_gmu_shutdown(gmu);
/* Remove the bus vote */
- icc_set_bw(gpu->icc_path, 0, 0);
+ dev_pm_opp_set_bw(&gpu->pdev->dev, NULL);
/*
* Make sure the GX domain is off before turning off the GMU (CX)
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 2d13694..718c705 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -913,11 +913,6 @@ static int adreno_get_pwrlevels(struct device *dev,
DBG("fast_rate=%u, slow_rate=27000000", gpu->fast_rate);
- /* Check for an interconnect path for the bus */
- gpu->icc_path = of_icc_get(dev, NULL);
- if (IS_ERR(gpu->icc_path))
- gpu->icc_path = NULL;
-
return 0;
}
@@ -958,13 +953,10 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
void adreno_gpu_cleanup(struct adreno_gpu *adreno_gpu)
{
- struct msm_gpu *gpu = &adreno_gpu->base;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(adreno_gpu->info->fw); i++)
release_firmware(adreno_gpu->fw[i]);
- icc_put(gpu->icc_path);
-
msm_gpu_cleanup(&adreno_gpu->base);
}
diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h
index cf0dc6d..c7d74a9 100644
--- a/drivers/gpu/drm/msm/msm_gpu.h
+++ b/drivers/gpu/drm/msm/msm_gpu.h
@@ -112,8 +112,6 @@ struct msm_gpu {
struct clk *ebi1_clk, *core_clk, *rbbmtimer_clk;
uint32_t fast_rate;
- struct icc_path *icc_path;
-
/* Hang and Inactivity Detection:
*/
#define DRM_MSM_INACTIVE_PERIOD 66 /* in ms (roughly four frames) */
--
2.7.4
next prev parent reply other threads:[~2020-06-06 4:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-06 4:25 [PATCH v3 0/6] Add support for GPU DDR BW scaling Sharat Masetty
2020-06-06 4:25 ` [PATCH v3 1/6] dt-bindings: drm/msm/gpu: Document gpu opp table Sharat Masetty
2020-06-06 4:25 ` [PATCH v3 2/6] drm: msm: a6xx: send opp instead of a frequency Sharat Masetty
2020-06-18 17:52 ` Rob Clark
2020-06-24 16:57 ` Matthias Kaehlcke
2020-06-06 4:25 ` Sharat Masetty [this message]
2020-06-06 4:25 ` [PATCH v3 4/6] arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling Sharat Masetty
2020-06-06 4:25 ` [PATCH v3 5/6] arm64: dts: qcom: sc7180: Add interconnects property for GPU Sharat Masetty
2020-06-06 4:25 ` [PATCH v3 6/6] arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp Sharat Masetty
2020-06-15 6:23 ` [PATCH v3 0/6] Add support for GPU DDR BW scaling Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1591417551-38051-4-git-send-email-smasetty@codeaurora.org \
--to=smasetty@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jcrouse@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=robdclark@gmail.com \
--cc=saravanak@google.com \
--cc=sibis@codeaurora.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).