devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sivaprakash Murugesan <sivaprak@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
	sivaprak@codeaurora.org, linux-arm-msm@vger.kernel.org,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH V7 0/4] Add APSS clock controller support for IPQ6018
Date: Sat,  6 Jun 2020 16:25:03 +0530	[thread overview]
Message-ID: <1591440907-20021-1-git-send-email-sivaprak@codeaurora.org> (raw)

The CPU on Qualcomm's IPQ6018 devices are primarily fed by APSS PLL and XO,
these are connected to a clock mux and enable block.

This patch series adds support for these clocks and inturn enables clocks
required for CPU freq.

[V7]
 * Removed dts patch from this series, will send that separately
 * Addressed Rob's minor comment on the binding
 * Patch 1 depends on a53 pll bindings
   https://lkml.org/lkml/2020/5/4/60
[V6]
 * Split mailbox driver from this series, mailbox changes will sent as a
   separate series
 * Addressed review comments from Stephen
[V5]
 * Addressed Bjorn comments on apss clk and dt-bindings
 * Patch 2 depends on a53 pll dt-bindings
   https://www.spinics.net/lists/linux-clk/msg48358.html  
[V4]
 * Re-written PLL found on IPQ platforms as a separate driver
 * Addressed stephen's comments on apss clock controller and pll
 * Addressed Rob's review comments on bindings
 * moved a53 pll binding from this series as it is not applicable, will send
   it separately.
[V3]
 * Fixed dt binding check error in patch2
   dt-bindings: clock: Add YAML schemas for QCOM A53 PLL
[V2]
 * Restructred the patch series as there are two different HW blocks,
   the mux and enable belongs to the apcs block and PLL has a separate HW
   block.
 * Converted qcom mailbox and qcom a53 pll documentation to yaml.
 * Addressed review comments from Stephen, Rob and Sibi where it is applicable.
 * Changed this cover letter to state the purpose of this patch series

Sivaprakash Murugesan (4):
  dt-bindings: clock: add ipq6018 a53 pll compatible
  clk: qcom: Add ipq apss pll driver
  clk: qcom: Add DT bindings for ipq6018 apss clock controller
  clk: qcom: Add ipq6018 apss clock controller

 .../devicetree/bindings/clock/qcom,a53pll.yaml     |  18 ++++
 drivers/clk/qcom/Kconfig                           |  19 ++++
 drivers/clk/qcom/Makefile                          |   2 +
 drivers/clk/qcom/apss-ipq-pll.c                    |  95 ++++++++++++++++++
 drivers/clk/qcom/apss-ipq6018.c                    | 106 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,apss-ipq.h          |  12 +++
 6 files changed, 252 insertions(+)
 create mode 100644 drivers/clk/qcom/apss-ipq-pll.c
 create mode 100644 drivers/clk/qcom/apss-ipq6018.c
 create mode 100644 include/dt-bindings/clock/qcom,apss-ipq.h

-- 
2.7.4


             reply	other threads:[~2020-06-06 10:55 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-06 10:55 Sivaprakash Murugesan [this message]
2020-06-06 10:55 ` [PATCH V7 1/4] dt-bindings: clock: add ipq6018 a53 pll compatible Sivaprakash Murugesan
2020-06-15 17:59   ` Rob Herring
2020-06-20  0:36   ` Stephen Boyd
2020-06-20  1:06     ` Sivaprakash Murugesan
2020-06-06 10:55 ` [PATCH V7 2/4] clk: qcom: Add ipq apss pll driver Sivaprakash Murugesan
2020-06-06 10:55 ` [PATCH V7 3/4] clk: qcom: Add DT bindings for ipq6018 apss clock controller Sivaprakash Murugesan
2020-06-09 19:47   ` Rob Herring
2020-06-20  2:26   ` Stephen Boyd
2020-06-06 10:55 ` [PATCH V7 4/4] clk: qcom: Add " Sivaprakash Murugesan
2020-06-18  7:00 ` [PATCH V7 0/4] Add APSS clock controller support for IPQ6018 Sivaprakash Murugesan
2020-06-20  0:31   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1591440907-20021-1-git-send-email-sivaprak@codeaurora.org \
    --to=sivaprak@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).