devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gene Chen <gene.chen.richtek@gmail.com>
To: robh+dt@kernel.org, matthias.bgg@gmail.com
Cc: lee.jones@linaro.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	gene_chen@richtek.com, Wilma.Wu@mediatek.com,
	shufan_lee@richtek.com, cy_huang@richtek.com
Subject: [PATCH] dt-bindings: mfd: Add bindings for the Mediatek MT6360 PMIC
Date: Tue, 16 Jun 2020 19:27:56 +0800	[thread overview]
Message-ID: <1592306876-3504-1-git-send-email-gene.chen.richtek@gmail.com> (raw)

From: Gene Chen <gene_chen@richtek.com>

Add devicetree binding document support Mediatek MT6360 PMIC

Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
 Documentation/devicetree/bindings/mfd/mt6360.txt | 53 ++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.txt

diff --git a/Documentation/devicetree/bindings/mfd/mt6360.txt b/Documentation/devicetree/bindings/mfd/mt6360.txt
new file mode 100644
index 0000000..e25b5c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6360.txt
@@ -0,0 +1,53 @@
+MediaTek MT6360 Multifunction Device Driver
+
+MT6360 is a multifunction device with the following sub modules:
+- ADC
+- Battery Charger/OTG boost
+- Flash LED/RGB LED/moonlight LED
+- 2-channel Buck
+- 6-channel LDO
+- USB_PD
+
+It is interfaced to host controller using I2C interface.
+This document describes the binding for MFD device and its sub module.
+
+Required properties:
+- compatible:	Must be "mediatek,mt6360_pmu"
+- reg:			Specifies the I2C slave address of PMIC block, Must be <0x34>
+- interrupts:	I2C device IRQ line connected to the main SoC.
+
+Optional subnodes:
+- ADC
+	Required properties:
+		- compatible: "mediatek,mt6360_adc"
+- battery charger/OTG boost
+	Required properties:
+		- compatible: "mediatek,mt6360_chg"
+- Flash LED/RGB LED/moonlight LED
+	Required properties:
+		- compatible: "mediatek,mt6360_led"
+- 2-channel Buck
+	Required properties:
+		- compatible: "mediatek,mt6360_pmic"
+- 6-channel LDO
+	Required properties:
+		- compatible: "mediatek,mt6360_ldo"
+- USB_PD
+	Required properties:
+		- compatible: "mediatek,mt6360_tcpc"
+
+Example:
+
+	#include <dt-bindings/usb/pd.h>
+
+	pmu: mt6360_pmu@34 {
+		status = "ok";
+		compatible = "mediatek,mt6360_pmu";
+		reg = <0x34>;
+		wakeup-source;
+		interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
-- 
2.7.4


             reply	other threads:[~2020-06-16 11:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-16 11:27 Gene Chen [this message]
2020-06-16 13:16 ` [PATCH] dt-bindings: mfd: Add bindings for the Mediatek MT6360 PMIC Lee Jones
2020-07-15 19:06 ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1592306876-3504-1-git-send-email-gene.chen.richtek@gmail.com \
    --to=gene.chen.richtek@gmail.com \
    --cc=Wilma.Wu@mediatek.com \
    --cc=cy_huang@richtek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gene_chen@richtek.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=shufan_lee@richtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).