Re: [PATCH v5 6/6] arm64: dts: add dts nodes for MT6779

[Hanks Chen <hanks.chen@mediatek.com>]

On Wed, 2020-03-25 at 17:39 +0100, Matthias Brugger wrote:
> 
> On 25/03/2020 10:31, Hanks Chen wrote:
> > this adds initial MT6779 dts settings fo board support,
> 
> "for board support"
> 
> > including cpu, gic, timer, ccf, pinctrl, uart...etc.
> 
> The etc is PMU and PSCI and sysirq, correct? Let's list at least sysirq as this
> is something MediaTek specific.
> 
> > 
> > Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/Makefile       |    1 +
> >  arch/arm64/boot/dts/mediatek/mt6779-evb.dts |   31 ++++
> >  arch/arm64/boot/dts/mediatek/mt6779.dtsi    |  265 +++++++++++++++++++++++++++
> >  3 files changed, 297 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> >  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> > index 458bbc4..53f1c61 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -1,6 +1,7 @@
> >  # SPDX-License-Identifier: GPL-2.0
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> > diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> > new file mode 100644
> > index 0000000..164f5cb
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> > @@ -0,0 +1,31 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (c) 2019 MediaTek Inc.
> > + * Author: Mars.C <mars.cheng@mediatek.com>
> > + *
> > + */
> > +
> > +/dts-v1/;
> > +#include "mt6779.dtsi"
> > +
> > +/ {
> > +	model = "MediaTek MT6779 EVB";
> > +	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
> > +
> > +	aliases {
> > +		serial0 = &uart0;
> > +	};
> > +
> > +	memory@40000000 {
> > +		device_type = "memory";
> > +		reg = <0 0x40000000 0 0x1e800000>;
> > +	};
> > +
> > +	chosen {
> > +		stdout-path = "serial0:921600n8";
> > +	};
> > +};
> > +
> > +&uart0 {
> > +	status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> > new file mode 100644
> > index 0000000..422ff5f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> > @@ -0,0 +1,265 @@
> [...]
> > +
> > +	uart_clk: dummy26m {
> > +		compatible = "fixed-clock";
> > +		clock-frequency = <26000000>;
> > +		#clock-cells = <0>;
> > +	};
> 
> No real clocks for uart? What about CLK_INFRA_UARTx?

sorry, I miss the clocks for uart
I'll add "baud" and "bus" in next version.

clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
clock-names = "baud", "bus";


> 
> > +
> > +	timer {
> > +		compatible = "arm,armv8-timer";
> > +		interrupt-parent = <&gic>;
> > +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
> > +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
> > +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
> > +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
> > +	};
> > +
> > +	soc {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		compatible = "simple-bus";
> > +		ranges;
> > +
> [...]
> > +
> > +		uart0: serial@11002000 {
> > +			compatible = "mediatek,mt6779-uart",
> > +				     "mediatek,mt6577-uart";
> > +			reg = <0 0x11002000 0 0x400>;
> > +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&uart_clk>;
> > +			status = "disabled";
> > +		};
> > +
> > +		uart1: serial@11003000 {
> > +			compatible = "mediatek,mt6779-uart",
> > +				     "mediatek,mt6577-uart";
> > +			reg = <0 0x11003000 0 0x400>;
> > +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&uart_clk>;
> > +			status = "disabled";
> > +		};
> 
> SoC has only two UARTs but clock driver has three, how comes?
> 

In mt6779 SoC, we have four UARTs.
but we only use UART0 and UART1 as standard serial ports for APMCU.The
others for modem side.
so we add two UARTs in dts.

> > +
> > +		audio: clock-controller@11210000 {
> > +			compatible = "mediatek,mt6779-audio", "syscon";
> > +			reg = <0 0x11210000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		mfgcfg: clock-controller@13fbf000 {
> > +			compatible = "mediatek,mt6779-mfgcfg", "syscon";
> > +			reg = <0 0x13fbf000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		mmsys: clock-controller@14000000 {
> > +			compatible = "mediatek,mt6779-mmsys", "syscon";
> > +			reg = <0 0x14000000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> 
> Please beware that we are refactoring the mmsys right now. Please use this new
> approach as this will go upstream soon.
> 
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=254897
> 
Got it, I'll update new approach in next version.
Thanks!

> Regards,
> Matthias
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek