From: Wen Su <Wen.Su@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
"Mark Brown" <broonie@kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>,
"Liam Girdwood" <lgirdwood@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
<linux-arm-kernel@lists.infradead.org>,
<wsd_upstream@mediatek.com>
Subject: Re: [RESEND v2 4/4] arm64: dts: mt6359: add PMIC MT6359 related nodes
Date: Mon, 22 Jun 2020 19:50:23 +0800 [thread overview]
Message-ID: <1592826623.17794.9.camel@mtkswgap22> (raw)
In-Reply-To: <16c03b9e-ee74-c080-f2cc-f915ac4a90be@gmail.com>
Hi Matthias,
On Mon, 2020-06-22 at 12:12 +0200, Matthias Brugger wrote:
>
> On 22/06/2020 08:40, Wen Su wrote:
> > From: "Wen Su" <wen.su@mediatek.com>
> >
> > add PMIC MT6359 related nodes which is for MT6779 platform
> >
> > Signed-off-by: Wen Su <wen.su@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt6359.dtsi | 306 +++++++++++++++++++++++++++++++
> > 1 file changed, 306 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt6359.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
> > new file mode 100644
> > index 0000000..4cafe1f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
> > @@ -0,0 +1,306 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2019 MediaTek Inc.
> > + */
> > +
> > +&pwrap {
> > + pmic: pmic {
> > + mt6359regulator: mt6359regulator {
>
> you are missing:
> compatible = "mediatek,mt6359";
> don't you?
I think this compatible string is for MFD driver.
And the MFD instantiate the regulator driver when it probes.
So this regulator patch set remove this compatible string.
Is it better to add this compatible string in this patch set ?
Thanks for your suggestion.
>
> Regards,
> Matthias
>
> > + compatible = "mediatek,mt6359-regulator";
> > + mt6359_vs1_buck_reg: buck_vs1 {
> > + regulator-name = "vs1";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <2200000>;
> > + regulator-enable-ramp-delay = <0>;
> > + regulator-always-on;
> > + };
> > + mt6359_vgpu11_buck_reg: buck_vgpu11 {
> > + regulator-name = "vgpu11";
> > + regulator-min-microvolt = <400000>;
> > + regulator-max-microvolt = <1193750>;
> > + regulator-ramp-delay = <5000>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-always-on;
> > + regulator-allowed-modes = <0 1 2>;
> > + };
> > + mt6359_vmodem_buck_reg: buck_vmodem {
> > + regulator-name = "vmodem";
> > + regulator-min-microvolt = <400000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-ramp-delay = <10760>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-always-on;
> > + };
> > + mt6359_vpu_buck_reg: buck_vpu {
> > + regulator-name = "vpu";
> > + regulator-min-microvolt = <400000>;
> > + regulator-max-microvolt = <1193750>;
> > + regulator-ramp-delay = <5000>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-allowed-modes = <0 1 2>;
> > + };
> > + mt6359_vcore_buck_reg: buck_vcore {
> > + regulator-name = "vcore";
> > + regulator-min-microvolt = <400000>;
> > + regulator-max-microvolt = <1193750>;
> > + regulator-ramp-delay = <5000>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-always-on;
> > + regulator-allowed-modes = <0 1 2>;
> > + };
> > + mt6359_vs2_buck_reg: buck_vs2 {
> > + regulator-name = "vs2";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <1600000>;
> > + regulator-enable-ramp-delay = <0>;
> > + regulator-always-on;
> > + };
> > + mt6359_vpa_buck_reg: buck_vpa {
> > + regulator-name = "vpa";
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <3650000>;
> > + regulator-enable-ramp-delay = <300>;
> > + };
> > + mt6359_vproc2_buck_reg: buck_vproc2 {
> > + regulator-name = "vproc2";
> > + regulator-min-microvolt = <400000>;
> > + regulator-max-microvolt = <1193750>;
> > + regulator-ramp-delay = <7500>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-always-on;
> > + regulator-allowed-modes = <0 1 2>;
> > + };
> > + mt6359_vproc1_buck_reg: buck_vproc1 {
> > + regulator-name = "vproc1";
> > + regulator-min-microvolt = <400000>;
> > + regulator-max-microvolt = <1193750>;
> > + regulator-ramp-delay = <7500>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-always-on;
> > + regulator-allowed-modes = <0 1 2>;
> > + };
> > + mt6359_vcore_sshub_buck_reg: buck_vcore_sshub {
> > + regulator-name = "vcore_sshub";
> > + regulator-min-microvolt = <400000>;
> > + regulator-max-microvolt = <1193750>;
> > + };
> > + mt6359_vaud18_ldo_reg: ldo_vaud18 {
> > + regulator-name = "vaud18";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_vsim1_ldo_reg: ldo_vsim1 {
> > + regulator-name = "vsim1";
> > + regulator-min-microvolt = <1700000>;
> > + regulator-max-microvolt = <3100000>;
> > + regulator-enable-ramp-delay = <480>;
> > + };
> > + mt6359_vibr_ldo_reg: ldo_vibr {
> > + regulator-name = "vibr";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_vrf12_ldo_reg: ldo_vrf12 {
> > + regulator-name = "vrf12";
> > + regulator-min-microvolt = <1100000>;
> > + regulator-max-microvolt = <1300000>;
> > + regulator-enable-ramp-delay = <120>;
> > + };
> > + mt6359_vusb_ldo_reg: ldo_vusb {
> > + regulator-name = "vusb";
> > + regulator-min-microvolt = <3000000>;
> > + regulator-max-microvolt = <3000000>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
> > + regulator-name = "vsram_proc2";
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1193750>;
> > + regulator-ramp-delay = <7500>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + mt6359_vio18_ldo_reg: ldo_vio18 {
> > + regulator-name = "vio18";
> > + regulator-min-microvolt = <1700000>;
> > + regulator-max-microvolt = <1900000>;
> > + regulator-enable-ramp-delay = <960>;
> > + regulator-always-on;
> > + };
> > + mt6359_vcamio_ldo_reg: ldo_vcamio {
> > + regulator-name = "vcamio";
> > + regulator-min-microvolt = <1700000>;
> > + regulator-max-microvolt = <1900000>;
> > + regulator-enable-ramp-delay = <1920>;
> > + };
> > + mt6359_vcn18_ldo_reg: ldo_vcn18 {
> > + regulator-name = "vcn18";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_vfe28_ldo_reg: ldo_vfe28 {
> > + regulator-name = "vfe28";
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <2800000>;
> > + regulator-enable-ramp-delay = <120>;
> > + regulator-always-on;
> > + };
> > + mt6359_vcn13_ldo_reg: ldo_vcn13 {
> > + regulator-name = "vcn13";
> > + regulator-min-microvolt = <900000>;
> > + regulator-max-microvolt = <1300000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt {
> > + regulator-name = "vcn33_1_bt";
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <3500000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi {
> > + regulator-name = "vcn33_1_wifi";
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <3500000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_vaux18_ldo_reg: ldo_vaux18 {
> > + regulator-name = "vaux18";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + mt6359_vsram_others_ldo_reg: ldo_vsram_others {
> > + regulator-name = "vsram_others";
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1193750>;
> > + regulator-ramp-delay = <5000>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + mt6359_vefuse_ldo_reg: ldo_vefuse {
> > + regulator-name = "vefuse";
> > + regulator-min-microvolt = <1700000>;
> > + regulator-max-microvolt = <2000000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_vxo22_ldo_reg: ldo_vxo22 {
> > + regulator-name = "vxo22";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <2200000>;
> > + regulator-enable-ramp-delay = <120>;
> > + regulator-always-on;
> > + };
> > + mt6359_vrfck_ldo_reg: ldo_vrfck {
> > + regulator-name = "vrfck";
> > + regulator-min-microvolt = <1500000>;
> > + regulator-max-microvolt = <1700000>;
> > + regulator-enable-ramp-delay = <480>;
> > + };
> > + mt6359_vbif28_ldo_reg: ldo_vbif28 {
> > + regulator-name = "vbif28";
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <2800000>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + mt6359_vio28_ldo_reg: ldo_vio28 {
> > + regulator-name = "vio28";
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + mt6359_vemc_ldo_reg: ldo_vemc {
> > + regulator-name = "vemc";
> > + regulator-min-microvolt = <2900000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt {
> > + regulator-name = "vcn33_2_bt";
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <3500000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi {
> > + regulator-name = "vcn33_2_wifi";
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <3500000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_va12_ldo_reg: ldo_va12 {
> > + regulator-name = "va12";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1300000>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + mt6359_va09_ldo_reg: ldo_va09 {
> > + regulator-name = "va09";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + mt6359_vrf18_ldo_reg: ldo_vrf18 {
> > + regulator-name = "vrf18";
> > + regulator-min-microvolt = <1700000>;
> > + regulator-max-microvolt = <1810000>;
> > + regulator-enable-ramp-delay = <120>;
> > + regulator-always-on;
> > + };
> > + mt6359_vsram_md_ldo_reg: ldo_vsram_md {
> > + regulator-name = "vsram_md";
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-ramp-delay = <10760>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + mt6359_vufs_ldo_reg: ldo_vufs {
> > + regulator-name = "vufs";
> > + regulator-min-microvolt = <1700000>;
> > + regulator-max-microvolt = <1900000>;
> > + regulator-enable-ramp-delay = <1920>;
> > + regulator-always-on;
> > + };
> > + mt6359_vm18_ldo_reg: ldo_vm18 {
> > + regulator-name = "vm18";
> > + regulator-min-microvolt = <1700000>;
> > + regulator-max-microvolt = <1900000>;
> > + regulator-enable-ramp-delay = <1920>;
> > + regulator-always-on;
> > + };
> > + mt6359_vbbck_ldo_reg: ldo_vbbck {
> > + regulator-name = "vbbck";
> > + regulator-min-microvolt = <1100000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > + mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 {
> > + regulator-name = "vsram_proc1";
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1193750>;
> > + regulator-ramp-delay = <7500>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + mt6359_vsim2_ldo_reg: ldo_vsim2 {
> > + regulator-name = "vsim2";
> > + regulator-min-microvolt = <1700000>;
> > + regulator-max-microvolt = <3100000>;
> > + regulator-enable-ramp-delay = <480>;
> > + };
> > + mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub {
> > + regulator-name = "vsram_others_sshub";
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <1193750>;
> > + };
> > + };
> > + };
> > +};
> >
next prev parent reply other threads:[~2020-06-22 11:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-22 6:40 [RESEND v2 0/4] Add Support for MediaTek PMIC MT6359 Regulator Wen Su
2020-06-22 6:40 ` [RESEND v2 1/4] dt-bindings: regulator: Add document for MT6359 regulator Wen Su
2020-06-22 6:40 ` [RESEND v2 2/4] mfd: Add for PMIC MT6359 registers definition Wen Su
2020-06-22 6:40 ` [RESEND v2 3/4] regulator: mt6359: Add support for MT6359 regulator Wen Su
2020-06-22 13:31 ` Mark Brown
2020-06-22 6:40 ` [RESEND v2 4/4] arm64: dts: mt6359: add PMIC MT6359 related nodes Wen Su
2020-06-22 10:12 ` Matthias Brugger
2020-06-22 11:50 ` Wen Su [this message]
2020-06-22 14:29 ` Matthias Brugger
-- strict thread matches above, loose matches on Subject: below --
2020-02-21 2:39 [RESEND v2 0/4] Add Support for MediaTek PMIC MT6359 Regulator Wen Su
2020-02-21 2:39 ` [RESEND v2 4/4] arm64: dts: mt6359: add PMIC MT6359 related nodes Wen Su
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1592826623.17794.9.camel@mtkswgap22 \
--to=wen.su@mediatek.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox