[PATCH v2 04/11] arm64: dts: renesas: Add HiHope RZ/G2M[N] Rev.3.0/4.0 specific into common file

[Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>]

Rev.3.0 and Rev.4.0 are identical and can be identified by using GP5_19
and GP5_21.

	Rev		GP5_19	GP5_21
	==============================
	Rev.3.0		0	0
	Rev.4.0		0	1

This patch creates hihope-common-rev4.dtsi file with
Rev.3.0/4.0 specific changes for HopeRun HiHope RZ/G2M[N] boards.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/hihope-rev4.dtsi | 124 +++++++++++++++++++
 1 file changed, 124 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/hihope-rev4.dtsi

diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
new file mode 100644
index 000000000000..9f869187aea6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[MN] Rev.3.0/4.0 main board
+ * common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x1801_clk: x1801-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x1801_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&pfc {
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
-- 
2.17.1