From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v2 08/11] arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 board with idk-1110wr display
Date: Wed, 24 Jun 2020 14:12:07 +0100 [thread overview]
Message-ID: <1593004330-5039-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <1593004330-5039-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Add support for idk-1110wr display as similarly done for Rev.2.0
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/Makefile | 3 ++-
.../r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts | 15 +++++++++++++++
2 files changed, 17 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 7878e6c2743f..f09abfc43825 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -3,7 +3,8 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb \
r8a774a1-hihope-rzg2m-rev2.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb \
r8a774a1-hihope-rzg2m-rev2-ex.dtb
-dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb \
+ r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb
dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
new file mode 100644
index 000000000000..06c04c59cc78
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+ status = "okay";
+};
--
2.17.1
next prev parent reply other threads:[~2020-06-24 13:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-24 13:11 [PATCH v2 00/11] Add support for HiHope RZ/G2M[N] Rev.3.0/4.0 Lad Prabhakar
2020-06-24 13:12 ` [PATCH v2 01/11] arm64: dts: renesas: r8a774a1-hihope-rzg2m[-ex/-ex-idk-1110wr]: Rename HiHope RZ/G2M boards Lad Prabhakar
2020-06-24 13:12 ` [PATCH v2 02/11] arm64: dts: renesas: r8a774b1-hihope-rzg2n[-ex]: Rename HiHope RZ/G2N boards Lad Prabhakar
2020-06-24 13:12 ` [PATCH v2 03/11] arm64: dts: renesas: hihope-common: Separate out Rev.2.0 specific into hihope-common-rev2.dtsi file Lad Prabhakar
2020-07-17 8:36 ` Pavel Machek
2020-07-17 9:18 ` Lad, Prabhakar
2020-06-24 13:12 ` [PATCH v2 04/11] arm64: dts: renesas: Add HiHope RZ/G2M[N] Rev.3.0/4.0 specific into common file Lad Prabhakar
2020-06-24 13:12 ` [PATCH v2 05/11] arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 main board support Lad Prabhakar
2020-06-24 13:12 ` [PATCH v2 06/11] arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 sub " Lad Prabhakar
2020-06-24 13:12 ` [PATCH v2 07/11] arm64: dts: renesas: hihope-rzg2-ex: Separate out lvds specific nodes into common file Lad Prabhakar
2020-06-24 13:12 ` Lad Prabhakar [this message]
2020-06-24 13:12 ` [PATCH v2 09/11] arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 main board support Lad Prabhakar
2020-06-24 13:12 ` [PATCH v2 10/11] arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 sub " Lad Prabhakar
2020-06-24 13:12 ` [PATCH v2 11/11] arm64: dts: renesas: Add HiHope RZ/G2N Rev2.0/3.0/4.0 board with idk-1110wr display Lad Prabhakar
2020-06-26 9:58 ` [PATCH v2 00/11] Add support for HiHope RZ/G2M[N] Rev.3.0/4.0 Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1593004330-5039-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).