Re: [PATCH v5 04/10] iommu/mediatek: Setting MISC_CTRL register

[chao hao <Chao.Hao@mediatek.com>]

On Mon, 2020-06-29 at 11:28 +0200, Matthias Brugger wrote:
> 
> On 29/06/2020 09:13, Chao Hao wrote:
> > Add F_MMU_IN_ORDER_WR_EN and F_MMU_STANDARD_AXI_MODE_BIT definition
> > in MISC_CTRL register.
> > F_MMU_STANDARD_AXI_MODE_BIT:
> >   If we set F_MMU_STANDARD_AXI_MODE_BIT(bit[3][19] = 0, not follow
> > standard AXI protocol), iommu will send urgent read command firstly
> > compare with normal read command to improve performance.
> 
> Can you please help me to understand the phrase. Sorry I'm not a AXI specialist.
> Does this mean that you will send a 'urgent read command' which is not described
> in the specifications instead of a normal read command?

ok.
iommu sends read command to next bus_node normally(we can name it to
cmd1), when cmd1 isn't handled by next bus_node, iommu has a urgent read
command is needed to be sent(we can name it to cmd2), iommu will send
cmd2 and replace cmd1. So cmd2 is handled by next bus_node firstly and
cmd2 will be handled secondly.
But for standard AXI protocol, it will ignore the priority of read
command and only be handled in order. So cmd2 is handled by next
bus_node after cmd1 is done.

> 
> > F_MMU_IN_ORDER_WR_EN:
> >   If we set F_MMU_IN_ORDER_WR_EN(bit[1][17] = 0, out-of-order write), iommu
> > will re-order write command and send more higher priority write command
> > instead of sending write command in order. The feature be controlled
> > by OUT_ORDER_EN macro definition.
> > 
> > Cc: Matthias Brugger <matthias.bgg@gmail.com>
> > Suggested-by: Yong Wu <yong.wu@mediatek.com>
> > Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> > ---
> >  drivers/iommu/mtk_iommu.c | 12 +++++++++++-
> >  drivers/iommu/mtk_iommu.h |  1 +
> >  2 files changed, 12 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index 8f81df6cbe51..67b46b5d83d9 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -42,6 +42,9 @@
> >  #define F_INVLD_EN1				BIT(1)
> >  
> >  #define REG_MMU_MISC_CTRL			0x048
> > +#define F_MMU_IN_ORDER_WR_EN			(BIT(1) | BIT(17))
> > +#define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
> 
> Wouldn't it make more sense to name it F_MMU_STANDARD_AXI_MODE_EN?
ok, you are right.
1'b1: follow standard axi protocol

> 
> > +
> >  #define REG_MMU_DCM_DIS				0x050
> >  
> >  #define REG_MMU_CTRL_REG			0x110
> > @@ -574,10 +577,17 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> >  	}
> >  	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
> >  
> > +	regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
> 
> We only need to read regval in the else branch.

ok, I got it. thanks

> 
> >  	if (MTK_IOMMU_HAS_FLAG(data->plat_data, RESET_AXI)) {
> >  		/* The register is called STANDARD_AXI_MODE in this case */
> > -		writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
> > +		regval = 0;
> > +	} else {
> > +		/* For mm_iommu, it can improve performance by the setting */
> > +		regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
> > +		if (MTK_IOMMU_HAS_FLAG(data->plat_data, OUT_ORDER_EN))
> > +			regval &= ~F_MMU_IN_ORDER_WR_EN;
> >  	}
> > +	writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
> >  
> >  	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
> >  			     dev_name(data->dev), (void *)data)) {
> > diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> > index 7cc39f729263..4b780b651ef4 100644
> > --- a/drivers/iommu/mtk_iommu.h
> > +++ b/drivers/iommu/mtk_iommu.h
> > @@ -22,6 +22,7 @@
> >  #define HAS_BCLK			BIT(1)
> >  #define HAS_VLD_PA_RNG			BIT(2)
> >  #define RESET_AXI			BIT(3)
> > +#define OUT_ORDER_EN			BIT(4)
> 
> Maybe something like OUT_ORDER_WR_EN, to make clear that it's about the the
> write path.
> 
ok, thanks for your advice.

> >  
> >  #define MTK_IOMMU_HAS_FLAG(pdata, _x) \
> >  		((((pdata)->flags) & (_x)) == (_x))
> >