From: Li Jun <jun.li@nxp.com>
To: balbi@kernel.org, shawnguo@kernel.org, robh+dt@kernel.org
Cc: gregkh@linuxfoundation.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, peter.chen@nxp.com,
Anson.Huang@nxp.com, peng.fan@nxp.com, horia.geanta@nxp.com
Subject: [PATCH v2 4/5] arm64: dts: imx8mp-evk: enable usb1 as host mode
Date: Mon, 6 Jul 2020 17:44:58 +0800 [thread overview]
Message-ID: <1594028699-1055-5-git-send-email-jun.li@nxp.com> (raw)
In-Reply-To: <1594028699-1055-1-git-send-email-jun.li@nxp.com>
Enable usb host port with type-A connector on imx8mp-evk board.
Signed-off-by: Li Jun <jun.li@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 3da1fff..c7cacf2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -91,6 +91,21 @@
status = "okay";
};
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
&usdhc2 {
assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
assigned-clock-rates = <400000000>;
@@ -172,6 +187,12 @@
>;
};
+ pinctrl_usb1_vbus: usb1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__HSIOMIX_usb2_OTG_PWR 0x19
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
--
2.7.4
next prev parent reply other threads:[~2020-07-06 9:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-06 9:44 [PATCH v2 0/5] add NXP imx8mp usb support Li Jun
2020-07-06 9:44 ` [PATCH v2 1/5] usb: dwc3: add platform data to dwc3 core device to pass data Li Jun
2020-07-22 14:33 ` Jun Li
2020-07-23 9:22 ` Felipe Balbi
2020-07-23 9:58 ` Jun Li
2020-08-13 9:54 ` Jun Li
2020-07-06 9:44 ` [PATCH v2 2/5] usb: dwc3: add imx8mp dwc3 glue layer driver Li Jun
2020-07-06 9:44 ` [PATCH v2 3/5] arm64: dtsi: imx8mp: add usb nodes Li Jun
2020-07-06 9:44 ` Li Jun [this message]
2020-07-06 9:44 ` [PATCH v2 5/5] dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings Li Jun
2020-07-14 3:00 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1594028699-1055-5-git-send-email-jun.li@nxp.com \
--to=jun.li@nxp.com \
--cc=Anson.Huang@nxp.com \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=horia.geanta@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peter.chen@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).