devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Taniya Das <tdas@codeaurora.org>
To: "Stephen Boyd" <sboyd@kernel.org>,
	"Michael Turquette  " <mturquette@baylibre.com>
Cc: David Brown <david.brown@linaro.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	Andy Gross <agross@kernel.org>,
	devicetree@vger.kernel.org, robh@kernel.org, robh+dt@kernel.org,
	Taniya Das <tdas@codeaurora.org>
Subject: [PATCH v4 1/4] clk: qcom: gdsc: Add support to enable retention of GSDCR
Date: Wed, 15 Jul 2020 12:06:47 +0530	[thread overview]
Message-ID: <1594795010-9074-2-git-send-email-tdas@codeaurora.org> (raw)
In-Reply-To: <1594795010-9074-1-git-send-email-tdas@codeaurora.org>

Add support for the RETAIN_FF_ENABLE feature which enables the
usage of retention registers. These registers maintain their
state after disabling and re-enabling a GDSC.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/gdsc.c | 12 ++++++++++++
 drivers/clk/qcom/gdsc.h |  1 +
 2 files changed, 13 insertions(+)

diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index 04944f1..2502430 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -29,6 +29,7 @@
 /* CFG_GDSCR */
 #define GDSC_POWER_UP_COMPLETE		BIT(16)
 #define GDSC_POWER_DOWN_COMPLETE	BIT(15)
+#define GDSC_RETAIN_FF_ENABLE		BIT(11)
 #define CFG_GDSCR_OFFSET		0x4
 
 /* Wait 2^n CXO cycles between all states. Here, n=2 (4 cycles). */
@@ -216,6 +217,14 @@ static inline void gdsc_assert_reset_aon(struct gdsc *sc)
 	regmap_update_bits(sc->regmap, sc->clamp_io_ctrl,
 			   GMEM_RESET_MASK, 0);
 }
+
+static void gdsc_retain_ff_on(struct gdsc *sc)
+{
+	u32 mask = GDSC_RETAIN_FF_ENABLE;
+
+	regmap_update_bits(sc->regmap, sc->gdscr, mask, mask);
+}
+
 static int gdsc_enable(struct generic_pm_domain *domain)
 {
 	struct gdsc *sc = domain_to_gdsc(domain);
@@ -268,6 +277,9 @@ static int gdsc_enable(struct generic_pm_domain *domain)
 		udelay(1);
 	}
 
+	if (sc->flags & RETAIN_FF_ENABLE)
+		gdsc_retain_ff_on(sc);
+
 	return 0;
 }
 
diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
index c36fc26..a5076fe 100644
--- a/drivers/clk/qcom/gdsc.h
+++ b/drivers/clk/qcom/gdsc.h
@@ -50,6 +50,7 @@ struct gdsc {
 #define AON_RESET	BIT(4)
 #define POLL_CFG_GDSCR	BIT(5)
 #define ALWAYS_ON	BIT(6)
+#define RETAIN_FF_ENABLE	BIT(7)
 	struct reset_controller_dev	*rcdev;
 	unsigned int			*resets;
 	unsigned int			reset_count;
-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.


  reply	other threads:[~2020-07-15  6:37 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-15  6:36 [PATCH v4 0/4] clk: qcom: Support for Low Power Audio Clocks on SC7180 Taniya Das
2020-07-15  6:36 ` Taniya Das [this message]
2020-07-15  6:36 ` [PATCH v4 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks " Taniya Das
2020-07-16 19:06   ` Rob Herring
2020-07-21  7:51   ` Stephen Boyd
2020-07-21 17:26     ` Taniya Das
2020-07-23  1:05       ` Stephen Boyd
2020-07-15  6:36 ` [PATCH v4 3/4] clk: qcom: gcc: Add support for GCC LPASS clock for SC7180 Taniya Das
2020-07-15  6:36 ` [PATCH v4 4/4] clk: qcom: lpass: Add support for LPASS clock controller " Taniya Das
2020-07-21  7:48   ` Stephen Boyd
2020-07-24 16:06     ` Taniya Das

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1594795010-9074-2-git-send-email-tdas@codeaurora.org \
    --to=tdas@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).