[PATCH v1 00/13] PHY: Add support for multilink configurations in Cadence Torrent PHY driver

[Swapnil Jakhade <sjakhade@cadence.com>]

Cadence Torrent PHY is a multiprotocol PHY supporting different multilink
PHY configurations including DisplayPort, PCIe, USB, SGMII, QSGMII etc.
This patch series extends functionality of Torrent PHY driver to support
following configurations:
- Single link PCIe configuration
- PCIe + SGMII/QSGMII Unique SSC multilink configuration
- Single link SGMII/QSGMII configuration
- Single link USB configuration
- PCIe + USB Unique SSC multilink configuration
- USB + SGMII/QSGMII multilink configuration

The changes have been validated on TI J7200 platform.

This patch series is dependent on [1] and [2] and should be applied on
top of these.

[1] https://lkml.org/lkml/2020/7/17/158

[2] https://lkml.org/lkml/2020/8/7/338

Swapnil Jakhade (13):
  phy: cadence-torrent: Add single link PCIe support
  phy: cadence-torrent: Check cmn_ready assertion during PHY power on
  phy: cadence-torrent: Add PHY APB reset support
  dt-bindings: phy: Add PHY_TYPE_QSGMII definition
  phy: cadence-torrent: Add support for PHY multilink configuration
  phy: cadence-torrent: Update PHY reset for multilink configuration
  phy: cadence-torrent: Add clk changes for multilink configuration
  phy: cadence-torrent: Add PHY link configuration sequences for single
    link
  phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals
  phy: cadence-torrent: Add single link SGMII/QSGMII register sequences
  phy: cadence-torrent: Add single link USB register sequences
  phy: cadence-torrent: Add PCIe + USB multilink configuration
  phy: cadence-torrent: Add USB + SGMII/QSGMII multilink configuration

 drivers/phy/cadence/phy-cadence-torrent.c | 1975 ++++++++++++++++++++-
 include/dt-bindings/phy/phy.h             |    1 +
 2 files changed, 1934 insertions(+), 42 deletions(-)

-- 
2.26.1