From: Anilkumar Kolli <akolli@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, devicetree@vger.kernel.org,
Anilkumar Kolli <akolli@codeaurora.org>
Subject: [PATCH v6 2/3] ath11k: copy ce service configs to hw_params
Date: Mon, 24 Aug 2020 22:14:29 +0530 [thread overview]
Message-ID: <1598287470-1871-3-git-send-email-akolli@codeaurora.org> (raw)
In-Reply-To: <1598287470-1871-1-git-send-email-akolli@codeaurora.org>
No functional changes, added target ce service configurations to hw_params.
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
V3:
- added ce svc configs in hw_params
drivers/net/wireless/ath/ath11k/ahb.c | 14 +++++++++-----
drivers/net/wireless/ath/ath11k/core.c | 6 ------
drivers/net/wireless/ath/ath11k/hw.h | 2 ++
3 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 8466c62a83d6..a45a7d62f283 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -159,7 +159,7 @@ static const struct ce_pipe_config target_ce_config_wlan[] = {
* This table is derived from the CE_PCI TABLE, above.
* It is passed to the Target at startup for use by firmware.
*/
-static const struct service_to_pipe target_service_to_ce_map_wlan[] = {
+static const struct service_to_pipe target_service_to_ce_map_wlan_ipq8074[] = {
{
.service_id = __cpu_to_le32(ATH11K_HTC_SVC_ID_WMI_DATA_VO),
.pipedir = __cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
@@ -579,8 +579,8 @@ static void ath11k_ahb_init_qmi_ce_config(struct ath11k_base *ab)
cfg->tgt_ce_len = ARRAY_SIZE(target_ce_config_wlan) - 1;
cfg->tgt_ce = target_ce_config_wlan;
- cfg->svc_to_ce_map_len = ARRAY_SIZE(target_service_to_ce_map_wlan);
- cfg->svc_to_ce_map = target_service_to_ce_map_wlan;
+ cfg->svc_to_ce_map_len = ab->hw_params.svc_to_ce_map_len;
+ cfg->svc_to_ce_map = ab->hw_params.svc_to_ce_map;
ab->qmi.service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ8074;
}
@@ -789,8 +789,8 @@ static int ath11k_ahb_map_service_to_pipe(struct ath11k_base *ab, u16 service_id
bool ul_set = false, dl_set = false;
int i;
- for (i = 0; i < ARRAY_SIZE(target_service_to_ce_map_wlan); i++) {
- entry = &target_service_to_ce_map_wlan[i];
+ for (i = 0; i < ab->hw_params.svc_to_ce_map_len; i++) {
+ entry = &ab->hw_params.svc_to_ce_map[i];
if (__le32_to_cpu(entry->service_id) != service_id)
continue;
@@ -890,6 +890,10 @@ static int ath11k_ahb_probe(struct platform_device *pdev)
goto err_hal_srng_deinit;
}
+ ab->hw_params.svc_to_ce_map_len =
+ ARRAY_SIZE(target_service_to_ce_map_wlan_ipq8074);
+ ab->hw_params.svc_to_ce_map = target_service_to_ce_map_wlan_ipq8074;
+
ath11k_ahb_init_qmi_ce_config(ab);
ret = ath11k_core_init(ab);
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 437b1123a34f..61a6f395c436 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -812,12 +812,6 @@ int ath11k_core_init(struct ath11k_base *ab)
return ret;
}
- ret = ath11k_init_hw_params(ab);
- if (ret) {
- ath11k_err(ab, "failed to get hw params %d\n", ret);
- return ret;
- }
-
ret = ath11k_core_soc_create(ab);
if (ret) {
ath11k_err(ab, "failed to create soc core: %d\n", ret);
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index d15fa7fd6d5d..ebe691cb4a13 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -129,6 +129,8 @@ struct ath11k_hw_params {
} fw;
const struct ath11k_hw_ops *hw_ops;
+ const struct service_to_pipe *svc_to_ce_map;
+ int svc_to_ce_map_len;
const struct ath11k_hw_ring_mask *ring_mask;
--
2.7.4
next prev parent reply other threads:[~2020-08-24 16:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-24 16:44 [PATCH v6 0/3] ath11k: Add IPQ6018 support Anilkumar Kolli
2020-08-24 16:44 ` [PATCH v6 1/3] dt: bindings: net: update compatible for ath11k Anilkumar Kolli
2020-08-24 21:27 ` Rob Herring
2020-08-24 16:44 ` Anilkumar Kolli [this message]
2020-09-07 9:59 ` [PATCH v6 2/3] ath11k: copy ce service configs to hw_params Kalle Valo
[not found] ` <87363t52nj.fsf@codeaurora.org>
2020-09-07 10:59 ` akolli
[not found] ` <010101746838d751-613bfbba-7cfe-496c-9244-41fc2262f665-000000@us-west-2.amazonses.com>
2020-09-07 16:25 ` Kalle Valo
2020-08-24 16:44 ` [PATCH v6 3/3] ath11k: add IPQ6018 support Anilkumar Kolli
2020-09-07 10:01 ` Kalle Valo
[not found] ` <87y2ll3nzh.fsf@codeaurora.org>
2020-09-07 11:01 ` akolli
2020-09-07 9:57 ` [PATCH v6 0/3] ath11k: Add " Kalle Valo
[not found] ` <877dt552q1.fsf@codeaurora.org>
2020-09-07 11:03 ` akolli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1598287470-1871-3-git-send-email-akolli@codeaurora.org \
--to=akolli@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).