From: <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v5 08/10] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
Date: Mon, 31 Jul 2017 15:36:41 +0800 [thread overview]
Message-ID: <15fa85cafc5b22520fa8a1b2972e101a727b566c.1501486190.git.sean.wang@mediatek.com> (raw)
In-Reply-To: <cover.1501486190.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Enable the nand device and setup pinmux on the mt7632m rfb with nand
support.
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 88 ++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
index ba7d1ab..63ffb78 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -19,3 +19,91 @@
model = "MediaTek MT7623N NAND reference board";
compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
};
+
+&pio {
+ nand_pins_default: nanddefault {
+ pins_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up;
+ };
+
+ pins_we {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_ale {
+ pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+};
+
+&nandc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins_default>;
+ nand@0 {
+ reg = <0>;
+ spare_per_sector = <64>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <12>;
+ nand-ecc-step-size = <1024>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "preloader";
+ reg = <0x0 0x40000>;
+ };
+
+ partition@40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+
+ partition@C0000 {
+ label = "uboot-env";
+ reg = <0xC0000 0x40000>;
+ };
+
+ partition@140000 {
+ label = "bootimg";
+ reg = <0x140000 0x2000000>;
+ };
+
+ partition@2140000 {
+ label = "recovery";
+ reg = <0x2140000 0x2000000>;
+ };
+
+ partition@4140000 {
+ label = "rootfs";
+ reg = <0x4140000 0x1000000>;
+ };
+
+ partition@5140000 {
+ label = "usrdata";
+ reg = <0x5140000 0x1000000>;
+ };
+ };
+ };
+};
+
+&bch {
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-07-31 7:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-31 7:36 [PATCH v5 00/10] arm: dts: extend mt7623 support sean.wang
2017-07-31 7:36 ` [PATCH v5 02/10] dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform sean.wang
2017-07-31 7:36 ` [PATCH v5 04/10] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi sean.wang
[not found] ` <cover.1501486190.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-07-31 7:36 ` [PATCH v5 01/10] dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 03/10] arm: dts: mt7623: add mt6323.dtsi file sean.wang-NuS5LvNUpcJWk0Htik3J/w
[not found] ` <f92864cf04cc3ddde20f25d402d8e5d3d915b2a8.1501486190.git.sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-08-02 1:47 ` Yingjoe Chen
2017-08-02 2:02 ` Sean Wang
2017-07-31 7:36 ` [PATCH v5 05/10] ARM: mediatek: add MT7623a smp bringup code sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 06/10] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` [PATCH v5 07/10] arm: dts: mt7623: enable the usb device on the mt7623n rfb sean.wang-NuS5LvNUpcJWk0Htik3J/w
2017-07-31 7:36 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w [this message]
2017-08-01 12:05 ` [PATCH v5 00/10] arm: dts: extend mt7623 support Matthias Brugger
2017-07-31 7:36 ` [PATCH v5 09/10] arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board sean.wang
2017-07-31 7:36 ` [PATCH v5 10/10] arm: dts: mt7623: add clock-frequency to CPU nodes sean.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15fa85cafc5b22520fa8a1b2972e101a727b566c.1501486190.git.sean.wang@mediatek.com \
--to=sean.wang-nus5lvnupcjwk0htik3j/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).