From: Swapnil Jakhade <sjakhade@cadence.com>
To: <vkoul@kernel.org>, <kishon@ti.com>, <robh+dt@kernel.org>,
<p.zabel@pengutronix.de>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <mparab@cadence.com>, <sjakhade@cadence.com>,
<yamonkar@cadence.com>, <tomi.valkeinen@ti.com>, <jsarha@ti.com>,
<nsekhar@ti.com>
Subject: [PATCH v3 06/13] phy: cadence-torrent: Update PHY reset for multilink configuration
Date: Thu, 17 Sep 2020 09:30:39 +0200 [thread overview]
Message-ID: <1600327846-9733-7-git-send-email-sjakhade@cadence.com> (raw)
In-Reply-To: <1600327846-9733-1-git-send-email-sjakhade@cadence.com>
For multilink configuration, deassert PHY and link reset after PHY
registers are configured in probe and only check link status in
power_on callback.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
---
drivers/phy/cadence/phy-cadence-torrent.c | 28 +++++++++++++++++------
1 file changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index cd02aa47dbc9..bdd96c76751e 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -1603,13 +1603,15 @@ static int cdns_torrent_phy_on(struct phy *phy)
u32 read_val;
int ret;
- /* Take the PHY out of reset */
- ret = reset_control_deassert(cdns_phy->phy_rst);
- if (ret)
- return ret;
+ if (cdns_phy->nsubnodes == 1) {
+ /* Take the PHY lane group out of reset */
+ reset_control_deassert(inst->lnk_rst);
- /* Take the PHY lane group out of reset */
- reset_control_deassert(inst->lnk_rst);
+ /* Take the PHY out of reset */
+ ret = reset_control_deassert(cdns_phy->phy_rst);
+ if (ret)
+ return ret;
+ }
/*
* Wait for cmn_ready assertion
@@ -1623,6 +1625,8 @@ static int cdns_torrent_phy_on(struct phy *phy)
return ret;
}
+ mdelay(10);
+
return 0;
}
@@ -1632,6 +1636,9 @@ static int cdns_torrent_phy_off(struct phy *phy)
struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent);
int ret;
+ if (cdns_phy->nsubnodes != 1)
+ return 0;
+
ret = reset_control_assert(cdns_phy->phy_rst);
if (ret)
return ret;
@@ -1886,7 +1893,7 @@ int cdns_torrent_phy_configure_multilink(struct cdns_torrent_phy *cdns_phy)
struct cdns_torrent_vals *cmn_vals, *tx_ln_vals, *rx_ln_vals;
struct cdns_torrent_vals *link_cmn_vals, *xcvr_diag_vals;
enum cdns_torrent_phy_type phy_t1, phy_t2, tmp_phy_type;
- int i, j, node, mlane, num_lanes;
+ int i, j, node, mlane, num_lanes, ret;
struct cdns_reg_pairs *reg_pairs;
enum cdns_torrent_ssc_mode ssc;
struct regmap *regmap;
@@ -1989,8 +1996,15 @@ int cdns_torrent_phy_configure_multilink(struct cdns_torrent_phy *cdns_phy)
reg_pairs[j].val);
}
}
+
+ reset_control_deassert(cdns_phy->phys[node].lnk_rst);
}
+ /* Take the PHY out of reset */
+ ret = reset_control_deassert(cdns_phy->phy_rst);
+ if (ret)
+ return ret;
+
return 0;
}
--
2.26.1
next prev parent reply other threads:[~2020-09-17 8:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-17 7:30 [PATCH v3 00/13] PHY: Add support for multilink configurations in Cadence Torrent PHY driver Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 01/13] phy: cadence-torrent: Add single link PCIe support Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 02/13] phy: cadence-torrent: Check cmn_ready assertion during PHY power on Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 03/13] phy: cadence-torrent: Add PHY APB reset support Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 04/13] dt-bindings: phy: Add PHY_TYPE_QSGMII definition Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 05/13] phy: cadence-torrent: Add support for PHY multilink configuration Swapnil Jakhade
2020-09-17 7:30 ` Swapnil Jakhade [this message]
2020-09-17 7:30 ` [PATCH v3 07/13] phy: cadence-torrent: Add clk changes for " Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 08/13] phy: cadence-torrent: Add PHY link configuration sequences for single link Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 09/13] phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 10/13] phy: cadence-torrent: Add single link SGMII/QSGMII register sequences Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 11/13] phy: cadence-torrent: Add single link USB " Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 12/13] phy: cadence-torrent: Add PCIe + USB multilink configuration Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 13/13] phy: cadence-torrent: Add USB + SGMII/QSGMII " Swapnil Jakhade
2020-09-18 5:17 ` [PATCH v3 00/13] PHY: Add support for multilink configurations in Cadence Torrent PHY driver Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1600327846-9733-7-git-send-email-sjakhade@cadence.com \
--to=sjakhade@cadence.com \
--cc=devicetree@vger.kernel.org \
--cc=jsarha@ti.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mparab@cadence.com \
--cc=nsekhar@ti.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=vkoul@kernel.org \
--cc=yamonkar@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).