From: Swapnil Jakhade <sjakhade@cadence.com>
To: <vkoul@kernel.org>, <kishon@ti.com>, <robh+dt@kernel.org>,
<p.zabel@pengutronix.de>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <mparab@cadence.com>, <sjakhade@cadence.com>,
<yamonkar@cadence.com>, <tomi.valkeinen@ti.com>, <jsarha@ti.com>,
<nsekhar@ti.com>
Subject: [PATCH v3 08/13] phy: cadence-torrent: Add PHY link configuration sequences for single link
Date: Thu, 17 Sep 2020 09:30:41 +0200 [thread overview]
Message-ID: <1600327846-9733-9-git-send-email-sjakhade@cadence.com> (raw)
In-Reply-To: <1600327846-9733-1-git-send-email-sjakhade@cadence.com>
Add support to configure link_cmn_vals and xcvr_diag_vals in case of single
link PHY configuration.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
---
drivers/phy/cadence/phy-cadence-torrent.c | 44 +++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index 6641f2f3a367..0367c0fe15e2 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -1809,6 +1809,7 @@ static int cdns_torrent_phy_init(struct phy *phy)
struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent);
const struct cdns_torrent_data *init_data = cdns_phy->init_data;
struct cdns_torrent_vals *cmn_vals, *tx_ln_vals, *rx_ln_vals;
+ struct cdns_torrent_vals *link_cmn_vals, *xcvr_diag_vals;
struct cdns_torrent_inst *inst = phy_get_drvdata(phy);
enum cdns_torrent_phy_type phy_type = inst->phy_type;
enum cdns_torrent_ssc_mode ssc = inst->ssc_mode;
@@ -1823,6 +1824,29 @@ static int cdns_torrent_phy_init(struct phy *phy)
if (phy_type == TYPE_DP)
return cdns_torrent_dp_init(phy);
+ /* PHY configuration specific registers for single link */
+ link_cmn_vals = init_data->link_cmn_vals[phy_type][TYPE_NONE][ssc];
+ if (link_cmn_vals) {
+ reg_pairs = link_cmn_vals->reg_pairs;
+ num_regs = link_cmn_vals->num_regs;
+ regmap = cdns_phy->regmap_common_cdb;
+ for (i = 0; i < num_regs; i++)
+ regmap_write(regmap, reg_pairs[i].off,
+ reg_pairs[i].val);
+ }
+
+ xcvr_diag_vals = init_data->xcvr_diag_vals[phy_type][TYPE_NONE][ssc];
+ if (xcvr_diag_vals) {
+ reg_pairs = xcvr_diag_vals->reg_pairs;
+ num_regs = xcvr_diag_vals->num_regs;
+ for (i = 0; i < inst->num_lanes; i++) {
+ regmap = cdns_phy->regmap_tx_lane_cdb[i + inst->mlane];
+ for (j = 0; j < num_regs; j++)
+ regmap_write(regmap, reg_pairs[j].off,
+ reg_pairs[j].val);
+ }
+ }
+
/* PMA common registers configurations */
cmn_vals = init_data->cmn_vals[phy_type][TYPE_NONE][ssc];
if (cmn_vals) {
@@ -2643,6 +2667,11 @@ static const struct cdns_torrent_data cdns_map_torrent = {
.reg_offset_shift = 0x2,
.link_cmn_vals = {
[TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
[TYPE_SGMII] = {
[NO_SSC] = &pcie_sgmii_link_cmn_vals,
[EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
@@ -2671,6 +2700,11 @@ static const struct cdns_torrent_data cdns_map_torrent = {
},
.xcvr_diag_vals = {
[TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
[TYPE_SGMII] = {
[NO_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
[EXTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
@@ -2803,6 +2837,11 @@ static const struct cdns_torrent_data ti_j721e_map_torrent = {
.reg_offset_shift = 0x1,
.link_cmn_vals = {
[TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
[TYPE_SGMII] = {
[NO_SSC] = &pcie_sgmii_link_cmn_vals,
[EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
@@ -2831,6 +2870,11 @@ static const struct cdns_torrent_data ti_j721e_map_torrent = {
},
.xcvr_diag_vals = {
[TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
[TYPE_SGMII] = {
[NO_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
[EXTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
--
2.26.1
next prev parent reply other threads:[~2020-09-17 8:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-17 7:30 [PATCH v3 00/13] PHY: Add support for multilink configurations in Cadence Torrent PHY driver Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 01/13] phy: cadence-torrent: Add single link PCIe support Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 02/13] phy: cadence-torrent: Check cmn_ready assertion during PHY power on Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 03/13] phy: cadence-torrent: Add PHY APB reset support Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 04/13] dt-bindings: phy: Add PHY_TYPE_QSGMII definition Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 05/13] phy: cadence-torrent: Add support for PHY multilink configuration Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 06/13] phy: cadence-torrent: Update PHY reset for " Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 07/13] phy: cadence-torrent: Add clk changes " Swapnil Jakhade
2020-09-17 7:30 ` Swapnil Jakhade [this message]
2020-09-17 7:30 ` [PATCH v3 09/13] phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 10/13] phy: cadence-torrent: Add single link SGMII/QSGMII register sequences Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 11/13] phy: cadence-torrent: Add single link USB " Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 12/13] phy: cadence-torrent: Add PCIe + USB multilink configuration Swapnil Jakhade
2020-09-17 7:30 ` [PATCH v3 13/13] phy: cadence-torrent: Add USB + SGMII/QSGMII " Swapnil Jakhade
2020-09-18 5:17 ` [PATCH v3 00/13] PHY: Add support for multilink configurations in Cadence Torrent PHY driver Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1600327846-9733-9-git-send-email-sjakhade@cadence.com \
--to=sjakhade@cadence.com \
--cc=devicetree@vger.kernel.org \
--cc=jsarha@ti.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mparab@cadence.com \
--cc=nsekhar@ti.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=vkoul@kernel.org \
--cc=yamonkar@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).