Re: [PATCH v1 3/6] dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW

[Hector Yuan <hector.yuan@mediatek.com>]

On Fri, 2020-10-23 at 14:05 +0530, Viresh Kumar wrote:
> On 23-10-20, 16:24, Hector Yuan wrote:
> > From: "Hector.Yuan" <hector.yuan@mediatek.com>
> > 
> > Add devicetree bindings for MediaTek HW driver.
> > 
> > Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com>
> > ---
> >  .../bindings/cpufreq/cpufreq-mediatek-hw.yaml      |   46 ++++++++++++++++++++
> >  1 file changed, 46 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
> > new file mode 100644
> > index 0000000..a99f44f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
> > @@ -0,0 +1,46 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MediaTek's CPUFREQ Bindings
> > +
> > +maintainers:
> > +  - Hector Yuan <hector.yuan@mediatek.com>
> > +
> > +description:
> > +  CPUFREQ HW is a hardware engine used by MediaTek
> > +  SoCs to manage frequency in hardware. It is capable of controlling frequency
> > +  for multiple clusters.
> > +
> > +properties:
> > +  compatible:
> > +    const: mediatek,cpufreq-hw
> > +
> > +  reg:
> > +    minItems: 1
> > +    maxItems: 2
> > +    description: |
> > +      Addresses and sizes for the memory of the HW bases in each frequency domain.
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +examples:
> > +  - |
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        cpufreq_hw: cpufreq@11bc00 {
> > +            compatible = "mediatek,cpufreq-hw";
> > +            reg = <0 0x11bc10 0 0x8c>,
> > +               <0 0x11bca0 0 0x8c>;
> > +        };
> > +    };
> 
> You still need to keep the CPU specific part here and explain how this
> block is going to get used using the other binding you added.
> 
OK, will add cpu part here in v8.