devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <robh+dt@kernel.org>
Cc: <linux-clk@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<eugen.hristev@microchip.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v2 8/8] clk: at91: sama7g5: register cpu clock
Date: Wed, 4 Nov 2020 19:45:26 +0200	[thread overview]
Message-ID: <1604511926-29516-9-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1604511926-29516-1-git-send-email-claudiu.beznea@microchip.com>

Register CPU clock as being the master clock prescaler. This would
be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider
between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the
frequencies supported by SAMA7G5 could be directly received from
CPUPLL + master clock prescaler and the extra divider would do no work in
case it would be enabled.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/clk/at91/sama7g5.c       | 13 ++++++-------
 include/dt-bindings/clock/at91.h |  1 +
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index d38766c6fc8c..b712dd273a0b 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -852,7 +852,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
 	if (IS_ERR(regmap))
 		return;
 
-	sama7g5_pmc = pmc_data_allocate(PMC_ETHPLL + 1,
+	sama7g5_pmc = pmc_data_allocate(PMC_CPU + 1,
 					nck(sama7g5_systemck),
 					nck(sama7g5_periphck),
 					nck(sama7g5_gck), 8);
@@ -929,18 +929,17 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
 		}
 	}
 
-	parent_names[0] = md_slck_name;
-	parent_names[1] = "mainck";
-	parent_names[2] = "cpupll_divpmcck";
-	parent_names[3] = "syspll_divpmcck";
-	hw = at91_clk_register_master_pres(regmap, "mck0_pres", 4, parent_names,
+	parent_names[0] = "cpupll_divpmcck";
+	hw = at91_clk_register_master_pres(regmap, "cpuck", 1, parent_names,
 					   &mck0_layout, &mck0_characteristics,
 					   &pmc_mck0_lock,
 					   CLK_SET_RATE_PARENT, 0);
 	if (IS_ERR(hw))
 		goto err_free;
 
-	hw = at91_clk_register_master_div(regmap, "mck0_div", "mck0_pres",
+	sama7g5_pmc->chws[PMC_CPU] = hw;
+
+	hw = at91_clk_register_master_div(regmap, "mck0", "cpuck",
 					  &mck0_layout, &mck0_characteristics,
 					  &pmc_mck0_lock, 0);
 	if (IS_ERR(hw))
diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
index fab313f62e8f..98e1b2ab6403 100644
--- a/include/dt-bindings/clock/at91.h
+++ b/include/dt-bindings/clock/at91.h
@@ -34,6 +34,7 @@
 #define PMC_AUDIOPMCPLL		(PMC_MAIN + 6)
 #define PMC_AUDIOIOPLL		(PMC_MAIN + 7)
 #define PMC_ETHPLL		(PMC_MAIN + 8)
+#define PMC_CPU			(PMC_MAIN + 9)
 
 #ifndef AT91_PMC_MOSCS
 #define AT91_PMC_MOSCS		0		/* MOSCS Flag */
-- 
2.7.4


  parent reply	other threads:[~2020-11-04 17:46 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-04 17:45 [PATCH v2 0/8] clk: at91: adapt for dvfs Claudiu Beznea
2020-11-04 17:45 ` [PATCH v2 1/8] clk: at91: sama7g5: fix compilation error Claudiu Beznea
2020-11-05  8:55   ` Tudor.Ambarus
2020-11-04 17:45 ` [PATCH v2 2/8] dt-bindings: clock: at91: add sama7g5 pll defines Claudiu Beznea
2020-11-04 17:45 ` [PATCH v2 3/8] clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT Claudiu Beznea
2020-11-04 17:45 ` [PATCH v2 4/8] clk: at91: clk-sam9x60-pll: allow runtime changes for pll Claudiu Beznea
2020-11-04 17:45 ` [PATCH v2 5/8] clk: at91: sama7g5: remove mck0 from parent list of other clocks Claudiu Beznea
2020-11-04 17:45 ` [PATCH v2 6/8] clk: at91: sama7g5: decrease lower limit for MCK0 rate Claudiu Beznea
2020-11-04 17:45 ` [PATCH v2 7/8] clk: at91: clk-master: re-factor master clock Claudiu Beznea
2020-11-04 17:45 ` Claudiu Beznea [this message]
2020-11-05 14:48 ` [PATCH v2 0/8] clk: at91: adapt for dvfs Claudiu.Beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1604511926-29516-9-git-send-email-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eugen.hristev@microchip.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).