From: Yash Shah <yash.shah@sifive.com>
To: linux-spi@vger.kernel.org, linux-serial@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org,
devicetree@vger.kernel.org, linux-gpio@vger.kernel.org
Cc: broonie@kernel.org, gregkh@linuxfoundation.org,
aou@eecs.berkeley.edu, lee.jones@linaro.org,
u.kleine-koenig@pengutronix.de, thierry.reding@gmail.com,
andrew@lunn.ch, peter@korsgaard.com, paul.walmsley@sifive.com,
palmer@dabbelt.com, robh+dt@kernel.org,
bgolaszewski@baylibre.com, linus.walleij@linaro.org,
sachin.ghadi@sifive.com, Yash Shah <yash.shah@sifive.com>
Subject: [PATCH 4/4] riscv: dts: add initial board data for the SiFive HiFive Unmatched
Date: Wed, 2 Dec 2020 13:33:56 +0530 [thread overview]
Message-ID: <1606896236-62780-5-git-send-email-yash.shah@sifive.com> (raw)
In-Reply-To: <1606896236-62780-1-git-send-email-yash.shah@sifive.com>
Add initial board data for the SiFive HiFive Unmatched A00
Signed-off-by: Yash Shah <yash.shah@sifive.com>
---
arch/riscv/boot/dts/sifive/Makefile | 3 +-
.../riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 253 +++++++++++++++++++++
2 files changed, 255 insertions(+), 1 deletion(-)
create mode 100644 arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
diff --git a/arch/riscv/boot/dts/sifive/Makefile b/arch/riscv/boot/dts/sifive/Makefile
index 6d6189e..74c47fe 100644
--- a/arch/riscv/boot/dts/sifive/Makefile
+++ b/arch/riscv/boot/dts/sifive/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb \
+ hifive-unmatched-a00.dtb
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
new file mode 100644
index 0000000..b1c3c59
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 SiFive, Inc */
+
+#include "fu740-c000.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
+#define RTCCLK_FREQ 1000000
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "SiFive HiFive Unmatched A00";
+ compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000",
+ "sifive,fu740";
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ cpus {
+ timebase-frequency = <RTCCLK_FREQ>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x2 0x00000000>;
+ };
+
+ soc {
+ };
+
+ hfclk: hfclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ clock-output-names = "hfclk";
+ };
+
+ rtcclk: rtcclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <RTCCLK_FREQ>;
+ clock-output-names = "rtcclk";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp451";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ regulators {
+ vdd_bcore1: bcore1 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-min-microamp = <5000000>;
+ regulator-max-microamp = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_bcore2: bcore2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-min-microamp = <5000000>;
+ regulator-max-microamp = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_bpro: bpro {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <2500000>;
+ regulator-max-microamp = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_bperi: bperi {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <1500000>;
+ regulator-always-on;
+ };
+
+ vdd_bmem: bmem {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microamp = <3000000>;
+ regulator-max-microamp = <3000000>;
+ regulator-always-on;
+ };
+
+ vdd_bio: bio {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microamp = <3000000>;
+ regulator-max-microamp = <3000000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo1: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <100000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo2: ldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo3: ldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo4: ldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo5: ldo5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <100000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo6: ldo6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo7: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ld09: ldo9 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ };
+
+ vdd_ldo10: ldo10 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microamp = <300000>;
+ regulator-max-microamp = <300000>;
+ };
+
+ vdd_ldo11: ldo11 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-min-microamp = <300000>;
+ regulator-max-microamp = <300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&qspi0 {
+ status = "okay";
+ flash@0 {
+ compatible = "issi,is25wp256", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ mmc@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3300 3300>;
+ disable-wp;
+ };
+};
+
+ð0 {
+ status = "okay";
+ phy-mode = "gmii";
+ phy-handle = <&phy0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
--
2.7.4
next prev parent reply other threads:[~2020-12-02 8:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 8:03 [PATCH 0/4] arch: riscv: add board and SoC DT file support Yash Shah
2020-12-02 8:03 ` [PATCH 1/4] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC Yash Shah
2020-12-02 13:04 ` Mark Brown
2020-12-02 14:58 ` Andrew Lunn
2020-12-03 6:36 ` Yash Shah
2020-12-02 8:03 ` [PATCH 2/4] riscv: dts: add initial support for the SiFive FU740-C000 SoC Yash Shah
2020-12-02 8:03 ` [PATCH 3/4] dt-bindings: riscv: Update YAML doc to support SiFive HiFive Unmatched board Yash Shah
2020-12-02 8:03 ` Yash Shah [this message]
2020-12-03 0:43 ` [PATCH 4/4] riscv: dts: add initial board data for the SiFive HiFive Unmatched kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1606896236-62780-5-git-send-email-yash.shah@sifive.com \
--to=yash.shah@sifive.com \
--cc=andrew@lunn.ch \
--cc=aou@eecs.berkeley.edu \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=peter@korsgaard.com \
--cc=robh+dt@kernel.org \
--cc=sachin.ghadi@sifive.com \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).